conversion
10-08-2008, 08:55 PM
#1
Teching In
Thread Starter
Join Date: Nov 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
conversion i have an 88 silverado pick-up and i have a 4.8 ltr engine and transmission with all the computer and wiring harnesses out of an 06 silverado. i would like
to drop the newer 4.8 with tranny in my 88 and was wondering if anyone knew what i would have to do electronically with the new computer and harness to make the new motor work with my guage cluster and anything else that it needs to and what i need to do to the fuel lines if anything. thanks
to drop the newer 4.8 with tranny in my 88 and was wondering if anyone knew what i would have to do electronically with the new computer and harness to make the new motor work with my guage cluster and anything else that it needs to and what i need to do to the fuel lines if anything. thanks
10-09-2008, 11:36 PM
#2
TECH Regular
iTrader: (1)
Join Date: Dec 2005
Location: Cape Cod, MA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
There are a few guys on the Truck section of Ls1tech(performancetrucks.net) that have done swaps similar to this. Go to that site and do a search or post this same ques. over there. Good luck.