402 stroker
383, medium 236/610 cam, afr 225's, headers and a Fast through stock mufflers, 390 gear and a six speed yields 480/426. Runnin 10.66 @ 129
Vid of 1/4 mile: http://s160.photobucket.com/albums/t...1066129mph.flv
402, mild 232/600 street cam, afr 225's, headers and a Fast through the mufflers, 410 gear and Auto tranny yields 464/448. Running 11.17 @ 117
These are street machines so I didn't go all out with high compression and wild cam. You can drive these any where with AC and radio on. Some people are getting 540/500 from a 402. I didn't want or need it !
vid of 1/4 mile: http://s160.photobucket.com/albums/t...b1117mpeg2.flv
Motor idle: http://s160.photobucket.com/albums/t...urrent=402.flv
Pete Incaudo did all the porting\polishing on the top end. Also his cam choice. I ask for a street machine 402 to get me high 11's...he kind of beat that request a little bit. A 402 in your vette will be a bad M-F'er
Good luck...let me know how it goes.
Pitt
Trending Topics
I figured you would be flooded with answers so I didn't bother to respond. I have a 383 stroker in my Z and a 402 stroker in my Silverado.
383, medium 236/610 cam, afr 225's, headers and a Fast through stock mufflers, 390 gear and a six speed yields 480/426. Runnin 10.66 @ 129
Vid of 1/4 mile: http://s160.photobucket.com/albums/t...1066129mph.flv
402, mild 232/600 street cam, afr 225's, headers and a Fast through the mufflers, 410 gear and Auto tranny yields 464/448. Running 11.17 @ 117
These are street machines so I didn't go all out with high compression and wild cam. You can drive these any where with AC and radio on. Some people are getting 540/500 from a 402. I didn't want or need it !
vid of 1/4 mile: http://s160.photobucket.com/albums/t...b1117mpeg2.flv
Motor idle: http://s160.photobucket.com/albums/t...urrent=402.flv
Pete Incaudo did all the porting\polishing on the top end. Also his cam choice. I ask for a street machine 402 to get me high 11's...he kind of beat that request a little bit. A 402 in your vette will be a bad M-F'er
Good luck...let me know how it goes.
Pitt
383, medium 236/610 cam, afr 225's, headers and a Fast through stock mufflers, 390 gear and a six speed yields 480/426. Runnin 10.66 @ 129
Vid of 1/4 mile: http://s160.photobucket.com/albums/t...1066129mph.flv
402, mild 232/600 street cam, afr 225's, headers and a Fast through the mufflers, 410 gear and Auto tranny yields 464/448. Running 11.17 @ 117
These are street machines so I didn't go all out with high compression and wild cam. You can drive these any where with AC and radio on. Some people are getting 540/500 from a 402. I didn't want or need it !
vid of 1/4 mile: http://s160.photobucket.com/albums/t...b1117mpeg2.flv
Motor idle: http://s160.photobucket.com/albums/t...urrent=402.flv
Pete Incaudo did all the porting\polishing on the top end. Also his cam choice. I ask for a street machine 402 to get me high 11's...he kind of beat that request a little bit. A 402 in your vette will be a bad M-F'er
Good luck...let me know how it goes.
Pitt
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Yeah, use the one Pete designed for me if you have good head flow ??
Here is his cell number. If you don't know who he is...was involved in the original development of AFR heads. He does all the head flow testing for a couple magazines. He knows these motors like the back of his hand. He is a wealth of knowledge...give hime a call, tell him I sent ya.
If you notice the TB in my picture from Comtech. Pete designed them. Took 3 years. I run them on both of mine.
By the way, someone jacked up my post. I like what they did but some info is missing. That motor vid is of the truck as is the motor picture and dyno chart. My truck 1/4 vid is gone. Sorry....if you need to see anything let me know.
**DO NOT POST NON-SPONSOR CONTACT INFORMATION**
Here is his cell number. If you don't know who he is...was involved in the original development of AFR heads. He does all the head flow testing for a couple magazines. He knows these motors like the back of his hand. He is a wealth of knowledge...give hime a call, tell him I sent ya.
If you notice the TB in my picture from Comtech. Pete designed them. Took 3 years. I run them on both of mine.
By the way, someone jacked up my post. I like what they did but some info is missing. That motor vid is of the truck as is the motor picture and dyno chart. My truck 1/4 vid is gone. Sorry....if you need to see anything let me know.
**DO NOT POST NON-SPONSOR CONTACT INFORMATION**
Last edited by Damian; Jul 18, 2009 at 11:35 AM.
