Anyone know anyone that's close to Springville or Oneonta, etc that does powdercoating? I'm also looking for a shop that can port the openings of my intake to 58mm? I could port it myself with the dye grinder but I don't know if I would be 100% certain I got all the metal shavings out after I'm done.

 

anyone need any 97+ interior peices,or any body parts off a 97 z28?ill sell the whole car for $500 if you pick it up.would be a great drag or parts car,it has no drivetrain.

 

Joe I want the back panel that say camaro to
do the Berger mod and what kind of shape is the hedliner in

 

the headliner needs recovered,the cardboard part was ok last time i checked.ill take 25 for the panel and ill give you the headliner if you want it to get it recovered so you wont have to pull yours.you still wont the 7.5?if so let me know and well make a deal.

 

I Done decided to go with a 9 inch but i do want the panel so whenever is good for you I'll take it

 

ok ill try and get it to ya this weekend,its got some scratches does the matter to ya?do you want the headliner?

 

Scratches don't matter it will be re painted I'm jus goin to use this one so I don't paint my stock one and end up not liking it black out since the headliner is shot I guess I'll pass on it I jus thought if it was in good shape I'd get and stick it in also if the back two speaker grills ain't cracked or busted up to bad I'd like to get them so I ain't got to put a whole on my stock ones for the Wolfe roll cage

 

Damn, I hate I missed that! Just paid 400 for some 295/40/17 MT that were practically brand new but I didn't want to pay that.

 

yea i woulnt paid 400 for used drs hell you put 20 more with it and you can get them new.
charie ill look for the speaker grills i think there ok.

 

Nah the 295s are about 470 new. These look brand new. Only 2 passes.

 

Sounds good I'll be at autozone tomorow night if somthin don't come up. These tires have a lot of life left jus tryin to move em there still for sale I'd anyone is interested. Also have a ls2 intake for sale 300 obo

 

i need to sell some stuff i found a killer deal on some heads and a cam i need some cash.
NEW stock z28-ss gm muffler with tail pipes,over 300 from dealer(still have the reciept)
$75
97 z28 body minus hatch-$500 picked up or $700 delivered upto 50 miles.
1987 suzuki samurai,started a rock crawler project not quiet finished,toyota axels with new bearings and new rear brakes,locked front and rear,spring over axel lift with all new poly bushings in the springs,i got a chevy 4.3 on the engine stand thats going in it,and a 700r4 also they both ran great i pulled them out of my 89 s10 blazer,i have drive shafts and have all ready cut the tunnel out for the 700r4.also comes with stock perfect samurai t case.everything for $2000 just needs finished up about $500 for misc. stuff like exaust.
4 brand new never even mounted super swamper tsl LTBS 31x11.50x16 $600 http://www.4wheelparts.com/Tires/Sup...0010&t_pl=3868
m/t et streets non dr 26x11.50x16 $200 obo lots of tread
ill part out the 97z to need interior or body parts pm me...

 

Anybody wanting get rid of their LT's or ORYP or both let me know. Also looking for stock Clutch master cylinder. Got the motor back together from intake to oil pan! whoooray

 

i got the stock master its about 2 years old ill take 40 shipped. i got a buddy with a ory to.

 

Hey guys-

I am looking for some parts..

I need ebony door panels and rear tail lights for 98+ Trans Am's..

I am also looking for the nozzles that the windshield wiper fluid is shot through for cleaning the windshield.. I broke one probably 5 years ago and still haven't replaced it..

Also, not sure if any of the TA drivers would be interested, but I am having some adapter plates made for those who might want a plug and play option to bolt up some Hella 90mm projectors for HID's.. Those should be here pretty soon..

 

hey tram, i havnt seen your car out in town if you want to do some racein id like to run ya, on motor of course.

 

Sure, if you see me around flag me down.. I am pretty sure I'm the only TA in Florence with TT2's, as hard as that is to believe..

I'm not on the bottle right now, just motor..

 

That sounds good. I think Ill take that master. Get with your buddy about that ORYP and see what he/she will take. You in flourence?

 

I'm down for some motor on motor runs haha, but seriously, gonna order some racestars and et streets soon. If anyone knows where I can get a 9in or 12 bolt cheap let me know

 

Spray is cheating...