Hey Darbadocious.......
Thread Starter
TECH Enthusiast
Joined: Dec 2005
Posts: 512
Likes: 0
From: Conway, AR
Hey Darbadocious....... 134 MPH!! I knew it was over 130. Also, looking at the logs, I think you can shift it a bit higher when you go to the track, logs look perfect!
Last edited by chrisj6; Nov 11, 2006 at 06:56 PM.
Thread Starter
TECH Enthusiast
Joined: Dec 2005
Posts: 512
Likes: 0
From: Conway, AR
It said 5800, I am shifting my Avalanche at 5800. I think your fine to about 6000, shouldnt be making shitloads of power after that on the stock cam. The pushrods will be fine, my stock ones lasted to 6200 on the z06 cam I had in the Z71.
How is the car running, after about a day or so it should really start to pick up, just drive the ***** off of it and it will learn to be aggressive! We might need to touch the Speed Density side of things up next time you need a tune. The MAF numbers were alot higher than the VE table so we need to work on that some. Other than that all the logs looked good! Let me know next time you need something done!
Chris
How is the car running, after about a day or so it should really start to pick up, just drive the ***** off of it and it will learn to be aggressive! We might need to touch the Speed Density side of things up next time you need a tune. The MAF numbers were alot higher than the VE table so we need to work on that some. Other than that all the logs looked good! Let me know next time you need something done!
Chris
Last edited by chrisj6; Nov 12, 2006 at 08:42 AM.
