anybody local need this stuff?
#1
TECH Apprentice
Thread Starter
iTrader: (23)
Join Date: Jan 2006
Location: Alabama
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
anybody local need this stuff?
got some stuff to get rid of. just pm and make offers, these prices are mostly what i put here. all items in perfect condition.
comp 7.4" chromoly pushrods-80
ws6store short stick-10
stock shifter base-20
ported maf ends-sold
stock ls1 springs 30
stock ls1 pushrods 30
alfa otto guage face blue glow 97-02 20
stock delco amp 20
stock rear hatch speakers 20
stock shifter 20
stock 02 exh. manifolds 40
stock air lid 20
comp 7.4" chromoly pushrods-80
ws6store short stick-10
stock shifter base-20
ported maf ends-sold
stock ls1 springs 30
stock ls1 pushrods 30
alfa otto guage face blue glow 97-02 20
stock delco amp 20
stock rear hatch speakers 20
stock shifter 20
stock 02 exh. manifolds 40
stock air lid 20
Last edited by FL Junkie; 12-26-2006 at 10:19 AM.
Trending Topics
#8
Originally Posted by RomanK
where's local? Id get the pushrods if i had enough exp to reinstall
#9
TECH Addict
iTrader: (1)
Join Date: Aug 2005
Location: Lawrenceville, GA
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kngkahious
it isnt hard to do. all u have to do is take the valve covers off losen the rockers pull out the old one put the new one's thell slide right in and readjust the rocker's which isnt hard either when u do it just tighten the nut down just enough to tack out all the slack (beingable to wiggle them up and down)then tighten them down a little but make sure u can still turn it with your finger then get some one to bump it over a few times to be safe and then start it up it will tap like hell and oil will go every were but this is the easyiest way and quickest tighten them down slowly till all the tapping comes out then give it another 3/4 turn its adjusted it will be kinda hard to here them stop till u get most of them adjusted cause it will be rater loud then just go back loosen them up till they start tappin then tighten them back down till it stops do the 3/4 turn and do it to all the rockers put the valve covers back on and your done it will take maybe 30 minutes maybe longer bein your first time