Sub-Frame Connector GP
Thread Starter
TECH Regular
Joined: Jan 2005
Posts: 476
Likes: 0
From: Pleasanton, CA
Sub-Frame Connector GP Is anyone interested in trying to get a sponsor to do a GP on some Double Diamond sub-frame connectors. I want to get me a set of weld on SFC. Anyone else?
Last edited by PewterWSSicc; Apr 17, 2005 at 02:53 AM.
Originally Posted by PewterWSSicc
Is anyone interested in trying to get a sponsor to do a GP on some sub-frame connectors. Not the regular BMR ones, but the kind that SLP makes. Does not have to be SLP though, just that type. The triagular kind. I want to get me a set of weld on SFC. Anyone else?
We are currently working on a diamond style 3 point subframe connector now that will be released shortly, I would be glad to offer a GP on them when released if anyone would be interested.
Regards
Ryan
Regards
Ryan
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by PewterWSSicc
Can you give us a time frame on those. I am also interested in getting your single adjustable panhard bar and non-adjustable LCA's. I wanna do the whole order at once though.
We are looking at 2.5-3 weeks, if this isnt a problem I will be glad to work with everyone. Price will be very resonable (like always). They are going to be weld on, I havent decided if we are going to offer a bolt in style yet.
I will post pics and info as soon as available.
Thanks!
Ryan
Ryan, I'm interested in a set. What would it cost to get a set powdercoated black? I'd LOVE to see some pics of the ground clearance when you can. I love the fit and finish of my UMI STB, I'm glad you guys are doin 3-pt SFC's now. I was hopin you or Spohn would step up.
Thread Starter
TECH Regular
Joined: Jan 2005
Posts: 476
Likes: 0
From: Pleasanton, CA
Well we have atleast a few people here that are interested in them. So the question is will you guys (UMI) have these ready pretty soon. My calculation is somewhere around another week or so. Well here is a list of who is interested so far.
1. Pewterwssicc
2. zeeman
3. zymosis
4. cyphur_traq
5. ls1ownzyou
6. white00ws6
Lets see if we cant get some more people to maybe turn this into an actual GP for there first sets made.
1. Pewterwssicc
2. zeeman
3. zymosis
4. cyphur_traq
5. ls1ownzyou
6. white00ws6
Lets see if we cant get some more people to maybe turn this into an actual GP for there first sets made.
) Thread Starter
TECH Regular
Joined: Jan 2005
Posts: 476
Likes: 0
From: Pleasanton, CA
Im not sure but doesnt UMI powdercoat pretty much everything they sell. I thought they did, i dont see why this would be any exception, unless they wanna sell a lower quality part that will rust faster.
Here is the updated list on how many we have so far.
1. Pewterwssicc
2. zeeman
3. zymosis
4. cyphur_traq
5. ls1ownzyou
6. white00ws6
7. 2k2WS6TA
Here is the updated list on how many we have so far.
1. Pewterwssicc
2. zeeman
3. zymosis
4. cyphur_traq
5. ls1ownzyou
6. white00ws6
7. 2k2WS6TA
Hello Everyone,
Good to see the interest is still here and I didn't forget about it. I am however a little behind schedule (like always) but we are working on these.
The goal I am trying to accomplish is no ground clearance loss at the moment. So far its looking good, just have to finish tweaking them in. As soon as I have some proto pics I will post them. I will do the best I can to have these completed as soon as possible. I would be anxious to see this many people running these.
As for the powder coat, yes they will be powder coated. I have never offered a product uncoated unless the customer specified it. Travis is probably referring to how SLP sells there weld in style.
I will post more info shortly.
Thanks
Ryan
Good to see the interest is still here and I didn't forget about it. I am however a little behind schedule (like always) but we are working on these.
The goal I am trying to accomplish is no ground clearance loss at the moment. So far its looking good, just have to finish tweaking them in. As soon as I have some proto pics I will post them. I will do the best I can to have these completed as soon as possible. I would be anxious to see this many people running these.
As for the powder coat, yes they will be powder coated. I have never offered a product uncoated unless the customer specified it. Travis is probably referring to how SLP sells there weld in style.
I will post more info shortly.
Thanks
Ryan
Originally Posted by UMI Performance
As for the powder coat, yes they will be powder coated. I have never offered a product uncoated unless the customer specified it. Travis is probably referring to how SLP sells there weld in style.
Ryan, this is sounding better and better every time you post up. Can't wait to see some pics!!
