Corvette Oil Pressure Switch...Where
11-03-2004, 12:35 PM
#1
Teching In
Thread Starter
Join Date: Sep 2004
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Corvette Oil Pressure Switch...Where Hey Folks,
Trying to permeantly wire in my wide band controller. After much reading, it appears the best method to do this is the oil pressure switch so that this thing will start working after the motor is running, avoiding spikes, and will turn itself off when the engine is turned off. This is required because of the sensitivity of the sensor. Only problem is that the people who have done this don't have Vettes and so they couldn't tell me how to do it in my car. Oh, it has to be a 12V source, so if anyone can think of something better or similiar, I am all ears for that one also. I am electronic/wiring stupid so I am gonna need some explicit directions if you can give me any info. Thanks a bunch,
Jim K.
2004 Vette by the way.
Trying to permeantly wire in my wide band controller. After much reading, it appears the best method to do this is the oil pressure switch so that this thing will start working after the motor is running, avoiding spikes, and will turn itself off when the engine is turned off. This is required because of the sensitivity of the sensor. Only problem is that the people who have done this don't have Vettes and so they couldn't tell me how to do it in my car. Oh, it has to be a 12V source, so if anyone can think of something better or similiar, I am all ears for that one also. I am electronic/wiring stupid so I am gonna need some explicit directions if you can give me any info. Thanks a bunch,
Jim K.
2004 Vette by the way.
