Another SRT-4....
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Another SRT-4.... A buddy of mine has an SRT and he has said "i think i can take you" a few times. So we leave the local meet and before we leave the parking lot he said lets play on the way home. So we get on the freeway and the first run was from like 60 to 110 and as soon as i hit the top of 3rd i started to pull and by th middle of 4th i had about 2 cars and i let off. We ran again and the same results. His a car was quicker than i thought it was going to be. Good runs and a lot of fun.
The SRT has stage 1, intake, bov, wastegate,downpipe and i dont know what else.
We're suppose to run again from a lower speed soon
The SRT has stage 1, intake, bov, wastegate,downpipe and i dont know what else.
We're suppose to run again from a lower speed soon
Joined: Oct 2005
Posts: 1,419
Likes: 1
From: Holland Twp/Milford, New Jersey
with my LT1, i can take most SRT-4s in the area. not many of them know how to launch from a dig so that's where i get them every time. they're pretty quick from a roll, but you should still be able to take him, like u did before! good job!
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Originally Posted by sdm1234
with my LT1, i can take most SRT-4s in the area. not many of them know how to launch from a dig so that's where i get them every time. they're pretty quick from a roll, but you should still be able to take him, like u did before! good job!
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Originally Posted by OdessitPashka
What mods do you have? On stock gears you should shift into 4th around 102-103 mph.
I have stock 3.42's.....yea we went well over 100
When i talked to my friend after the race he said we went 120.
Reason why I was asking is because you said you went till 110mph. I trap 110mph and I shift into 4th half a second before finish line. You said you went through 4th for a while....
Trending Topics
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Originally Posted by OdessitPashka
Reason why I was asking is because you said you went till 110mph. I trap 110mph and I shift into 4th half a second before finish line. You said you went through 4th for a while....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Originally Posted by bigradical
I saw one this weekend where we cruise that is supposedly boosting 28 lbs. It was pretty impressive.
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
depending on what turbo they have, running 28lbs might be too much. i mean if they are on the stock turbo, then 24-25lbs is where the turbo stops be efficient. my friend has a srt-4 on a stock turbo and on the dyno, he makes maxx power of 308/380 at 24lbs. all he has is stg 2 with toys, intake, bov, wastegate, exhaust, 3in downpipe with cutout, and a f'ing big intercooler. thats pretty impressive for the minimal mods he has. from what i heard going that many lbs on a stock turbo isnt doing much.
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Originally Posted by necrocannibal
My SRT4 put 2-3 cars on a Heads and Cam 02 T/A making 420 rwhp. They can be nasty.
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Originally Posted by necrocannibal
Just full bolt on and .50 trim. Made 380 to the wheels. Sucked from a dig though. 
Pulled a C6 HARD!!!
Pulled a C6 HARD!!!