Hubs
03-06-2009, 06:10 PM
#1
Hubs I have a 1996 Camaro with the LS1 front brake swap. I had aknocking nosie when stopping, so I had the car up on the lift today I found that the right front hub had a ungodly amount of play. So great the hub is bad, not to hard to change, but a guy that I trust said that the hubs from my 96 LT1 hubs will not work in the LS1 spindles? Is that true? I did a google search and found some posts that say other wise. Cause I rather not spend the money if I do not have to, because the old LT1 brakes are still in my shed.
03-07-2009, 09:41 AM
#2
TECH Apprentice
iTrader: (2)
Join Date: Jul 2006
Location: Oshawa (Home of the 5th-gen)
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
They're the same. Bolt it up and see. If it DOESN'T bolt up, come back and tell us 
.
The front hubs are notorious for wearing out way too early. They're simply under-engineered for the weight of our cars and the loads that many people put on them
.
.The front hubs are notorious for wearing out way too early. They're simply under-engineered for the weight of our cars and the loads that many people put on them
.