Ebay Panhard Bar...
Thread Starter
Registered User
Joined: Jun 2009
Posts: 5
Likes: 0
Ebay Panhard Bar... Looks like a good deal on a panhard bar, but what do you guys think? $89+ shipping seems cheap..
Ebay Listing
Ebay Listing
Thanks guys! We appreciate it
First off it was very nice of the eBay guy to copy our write up for the panhard bar... and take word for word about our rod ends and the rod end picture!
Yes the item is cheap and there isn't many ways to make a panhard bar. But please consider this-
1. The guy is probably making them in his home garage.. this means there is no testing done on the item. We physically test our items to insure you are receiving the best item possible. We have vehicles running single digits with our items and also vehicles running American Iron, CMC and winning SCCA championships.
2. Also if at all possible please support the board sponsors who pay to keep this site up and running the way it is. It is not cheap for us to be a part of this site and your support helps us support this community.
3. And lastly.. I am not found of aluminum panhard bars. Under research we have found the aluminum bars to flex under hard loads. We stick with steel or chrome moly in these application.
Hope that helps and good luck with your purchase!
Ryan
First off it was very nice of the eBay guy to copy our write up for the panhard bar... and take word for word about our rod ends and the rod end picture!
Yes the item is cheap and there isn't many ways to make a panhard bar. But please consider this-
1. The guy is probably making them in his home garage.. this means there is no testing done on the item. We physically test our items to insure you are receiving the best item possible. We have vehicles running single digits with our items and also vehicles running American Iron, CMC and winning SCCA championships.
2. Also if at all possible please support the board sponsors who pay to keep this site up and running the way it is. It is not cheap for us to be a part of this site and your support helps us support this community.
3. And lastly.. I am not found of aluminum panhard bars. Under research we have found the aluminum bars to flex under hard loads. We stick with steel or chrome moly in these application.
Hope that helps and good luck with your purchase!
Ryan
