Wolf adjustable spring mounts
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Sep 2006
Location: Illlinois
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Wolf adjustable spring mounts
Anyone using these? Any opinions? Are they just for drag or good for anything else?
http://www.wolferacecraft.com/detail.aspx?ID=820
http://www.wolferacecraft.com/detail.aspx?ID=820
#2
12 Second Club
iTrader: (28)
Looks like a coilover type conversion setup. I'd get it myself if it wasn't a permanent thing (weld-in). The springs that are optional with it are 150lbs which should work for cornering too if you have 550lb springs up front (a common rate for lowering springs). The only thing I'm wondering is how low car will be when the adjuster is all the way at the top, and how high/safe it will be when the adjuster is at the bottom. You can probably use a shorter/taller coilover spring.
#5
they give you adjustment in ride height and a much wider variety of spring rates to choose from. those are the main benefits. springs of that size are very affordable so you can have a few sets to swap out for different uses (autox/drag/street/road course)