Bad Blu Formula

iTrader: (3)

I am pretty sure my rod ends are worn out on my PHR. I was taking a look at the QA1 rod ends, but I'm not sure which ones would be appropriate for a PHR. Anyone have some insight or suggestions on which kind to go with for a street car?

UMI Sales

iTrader: (1)

Who manufactured the bar if you don't mind me asking? I just figured seeing how you are asking what other options do you have. Below is a link to show you what all options UMI Performance has to offer.

http://www.umiperformance.com/catalo...a4rffrjv8hu295

http://www.umiperformance.com/catalo...a4rffrjv8hu295

We also offer replacement QA1 self lubricating rod ends for $29.99 each.

If you have any other questions feel free to ask and I will be more than glad to help.
Thanks
Brad

pewter2002

iTrader: (4)

Umi, Strano, Summit carry them. I got replacements for my (purchased used) BMR adj PHR - these were QA1 teflon lined - $10 or $12 ea plus shipping etc. One is RH thread, the other is - you guessed it -LH thread. Support our sponsors!

redracer1

iTrader: (2)

If you have a UMI PHR can you replace with the new roto/joints?

http://www.umiperformance.com/catalo...ndex&cPath=199

Bad Blu Formula

iTrader: (3)

Thanks for the listings UMI. Now I need to find out what my thread size is and if I have left and right threaded ends.

UMI Sales

iTrader: (1)

Hello
No Problem! Leave me know what you need and I will be more than glad to help.
Thanks
Brad