Spring Problem
#1
Teching In
Thread Starter
Join Date: Jun 2005
Location: Sanger, Ca
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok guys im switching back to stock springs. So i take off the top nut and it suppose to come off right. The dam thing is stuck(Rubber piece) i tried prying it off and nothing. Any ideas what it could be?
![](http://i261.photobucket.com/albums/ii65/ericaquintero/IMAGE014-1.jpg)
Last edited by camarozl1; 03-19-2010 at 09:33 PM.
#2
TECH Veteran
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not quite sure what you're having problems with, as the picture is a bit small to see any details. There is the "upper strut mount", which is the large rubber piece with the two studs and the two threaded inserts. It appears that you successfully removed that, and there's a smaller, wedged shaped rubber piece that sits inside the strut mount. Although it's a seperate piece, as far as I know, it doesn't have to come out to do a spring swap.