lowering question?
#1
On The Tree
Thread Starter
Join Date: Mar 2010
Location: BAY AREA
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
lowering question?
i have been thinking of lowering my Camaro a little with the eibatch 1.3" lowering kit.
when i first put them on i had a little problem with my rear wheels cause they were a little to wide(10.5)i had to bang in some of the body in order to have them fit.
will i encounter a problem with the lowering kit?
when i first put them on i had a little problem with my rear wheels cause they were a little to wide(10.5)i had to bang in some of the body in order to have them fit.
will i encounter a problem with the lowering kit?
#2
TECH Fanatic
iTrader: (4)
Yes. Do you have an adjustable panhard bar? If not, get one to help center the rear. Also get the proper offset for the rears (50mm, I believe for the 17x11) You usually have to hammer the inner fender well (BFH mod) and possibly roll the outer lip. Some have gotten away with one or the other. I would do both to keep from cutting the tire.