brake problem after shock install
Thread Starter
Staging Lane
Joined: Feb 2005
Posts: 96
Likes: 1
From: Baltimore MD
brake problem after shock install Over the weekend I installed koni shocks, bmr springs, strano sway bar, new ball joints and control arm bushings. I put it all back in took it to ntb for alignment they say i have a problem. My left front grabs every 3/4 turn. So I get new rotors pad and left front caliper. Go for a test drive around the neighbor hood all is well I thought it was still draging but its all new. I go on the highway and the brakes give out pedal to the floor left front extremely hot brake light came on. Tow it home and all is well again brakes feel good. A some people say replace the rubber line. So strano sends me some stainless lines. Install that line to see if it works it now drags all the time. For the life of me I cant figure this out. I did take the master cyliner off the booster for the left shock but that looks fine. Only the left front drags. Anybody have a idea on what is the cause??
