Understanding rotors
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Chicago Il
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ok i need help understand this you guys can someone or all you guys help me understand the diffrent rotors?
from my understanding C5 were 13 inch C6 were 14 inch together wit Camaro SS and G8 GXP just diffrent lug patterns..
from my understanding C5 were 13 inch C6 were 14 inch together wit Camaro SS and G8 GXP just diffrent lug patterns..
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here is some info from the small amount of research I have done on the matter :
93-97 F-body (LT1)
10.93" Front Rotors
98-02 F-body (LS1)
11.93" Front Rotors
C5/C6 Corvette (Base Models)
12.8" Front Rotors
C5/C6 Corvette (Z51 Package)
13.4" Front Rotors
C6 Corvette (Z06)
14.0" Front Rotors
5th Gen Camaro SS
14.0" Front Rotors
I think the 5th Gen Camaro rotors have the same lug patern but the lug holes are slightly larger. As I posted in the other thread the center bore in the rotor hat is smaller than the 4th Gen/Vette so it will need to be enlarged before it can fit over the hub.
Good luck and don't take what I posted as gospel! I'm sure someone else can correct a few things.
93-97 F-body (LT1)
10.93" Front Rotors
98-02 F-body (LS1)
11.93" Front Rotors
C5/C6 Corvette (Base Models)
12.8" Front Rotors
C5/C6 Corvette (Z51 Package)
13.4" Front Rotors
C6 Corvette (Z06)
14.0" Front Rotors
5th Gen Camaro SS
14.0" Front Rotors
I think the 5th Gen Camaro rotors have the same lug patern but the lug holes are slightly larger. As I posted in the other thread the center bore in the rotor hat is smaller than the 4th Gen/Vette so it will need to be enlarged before it can fit over the hub.
Good luck and don't take what I posted as gospel! I'm sure someone else can correct a few things.
#4
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: May 2009
Location: Chicago Il
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks bro I appreciate it cause iv looked everywhere and can't find too much information. I tried the parts websites but doesn't give to much info on measurements mostly pics.. But that's I really appreciate all the info