Suspension & Brakes Springs | Shocks | Handling | Rotors

Adjustable panhard rods

Thread Tools
 
Search this Thread
 
Old 03-29-2011, 12:12 PM
  #1  
TECH Fanatic
Thread Starter
iTrader: (5)
 
carlos64030's Avatar
 
Join Date: Jun 2008
Posts: 1,307
Received 10 Likes on 4 Posts

Default Adjustable panhard rods

I've been searching around these forums trying to find an answer to a question I've been wondering about before I make my purchase, but haven't had any luck finding a direct answer.

Soooooo with that said... is there an advantage to installing a double adjustable panhard rod opposed to a single adjustable one? Here's the deal: My car has been lowered since 1997. I knew the rear wasn't centered, but it was never a big deal. Now I'm about to install my new wheels and tires, therefore, even amounts of clearance will be critical since the rear tires are 345-30-19s.
Old 03-29-2011, 12:31 PM
  #2  
On The Tree
iTrader: (4)
 
projektnitemare13's Avatar
 
Join Date: Nov 2010
Location: Lancaster, PA
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Default

Doube adjustable you can simply go under the car and use a wrench to adjust it, single adjustable, you need to remove one of the bolts and then adjust and re install. double is about a million times easier.
Old 03-29-2011, 03:23 PM
  #3  
LS1Tech Premium Sponsor
iTrader: (40)
 
BMR Sales2's Avatar
 
Join Date: Nov 2008
Location: Seffner, FL
Posts: 3,451
Likes: 0
Received 17 Likes on 16 Posts

Default

Like was stated just go ahead and buy a double adjsutable which will allow to adjust it on the car, if you do the single adjustable you are going to have to atleast drop one end of the bar to adjust it.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302


Find a Quality alignment shop near you!




All times are GMT -5. The time now is 03:01 PM.