BMR Track pac
Thread Starter
Turd Gen Guy
iTrader: (63)
Joined: Dec 2008
Posts: 1,532
Likes: 3
From: andalusia, alabama
BMR Track pac does anyone have any pics of one installed on the car and on the ground?? the whole setup looks nice but the hump in the middle looks like it would scrub on almost anything. ive searched and found installed pics.. but none on the ground.
It does sit a little low but generally doesn't have any clearance problem as long as the car isn't lowered a bunch. We put that hump in the crossbrace to give more clearance to run the exhaust over the crossbrace. If you were that concerned about clearance I could get you a BMR Trak Pak with a straight crossbrace rather than the one with the bend in it.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Great to hear! (*spell correction!)
Last edited by BMR Tech2; Oct 17, 2011 at 09:54 AM.
Thread Starter
Turd Gen Guy
iTrader: (63)
Joined: Dec 2008
Posts: 1,532
Likes: 3
From: andalusia, alabama
Installed the trak pak yesterday and I couldnt be happier. Its a really nice peice and I can slide a coke can under the "hump" in the crossmember and it doesnt come close to touching. Went on with minor mods and some good country boy welding. Thanks to the guys at bmr
Last edited by 1nasty86; Oct 15, 2011 at 03:31 PM.
