What to do for autox?
Thread Starter
Joined: Nov 2001
Posts: 357
Likes: 0
From: Dalton,Georgia
What to do for autox? I autox in SM in the Scca.I drive the Sh*t out of the car every day. I don't car if the car has a pleasant ride or not, I want it to handle.
I am wanting to either cut my 1LE springs and lower the car and make the ride stiffer or buy some new springs to lower the car and make it stiffer.What will give me the best results.
Is there a front-end aliment more aggressive than stock alignment that will not wear my front tires out to fast?
These are my mods
Suspension: 1LE springs and sway bars, KYB AGX Shocks, BMR Strut Tower Brace, BMR Lower Control Arms, BMR Adjustable TQ Arm, BMR Drive Shaft Safety Loop, BMR Sub Frames
Stock front end alignment. I have just bought a used set of Zr1's so 17x9.5 in the front and 17x11's in the rear. I am already looking for two more 17x11's for the front.
I am wanting to either cut my 1LE springs and lower the car and make the ride stiffer or buy some new springs to lower the car and make it stiffer.What will give me the best results.
Is there a front-end aliment more aggressive than stock alignment that will not wear my front tires out to fast?
These are my mods
Suspension: 1LE springs and sway bars, KYB AGX Shocks, BMR Strut Tower Brace, BMR Lower Control Arms, BMR Adjustable TQ Arm, BMR Drive Shaft Safety Loop, BMR Sub Frames
Stock front end alignment. I have just bought a used set of Zr1's so 17x9.5 in the front and 17x11's in the rear. I am already looking for two more 17x11's for the front.
