Strange brake rear problems
09-02-2013, 02:26 PM
#1
Teching In
Thread Starter
Join Date: Jan 2013
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Strange brake rear problems I installed the strange brake kit on my 02 t/a, I have a big bearing 9 inch with moser axles, when I installed the back,the inside of the rotors is slightly touching the caliper bracket, I have to shim the rotor away from the axle around 1/8 of an Inch to make it all clear. Has anyone else run across this problem, did I receive the wrong rotors for the rear, I don't like the shimming because of putting more stress on the wheel studs.
