Swaybar movement issue.
Swaybar movement issue. I have a UMI drag sway bar on my car and I've noticed it keeps sliding over to the right against the shock. I use a pry bar to get it back centered and then after driving a short while it will make it's way back over.
Just wondering what some causes could be and maybe some suggestions on what to do to correct it.
Just wondering what some causes could be and maybe some suggestions on what to do to correct it.
Last edited by BlackSS2001; Sep 6, 2016 at 02:15 PM.
Get it back into position then check the torque on the clamshells. If they are still torqued down then the bushing may just be worn and ready for a replace. If they are worn, it may be worth considering UMI heavy duty mounts.
http://umiperformance.com/catalog/in...roducts_id=465
http://umiperformance.com/catalog/in...roducts_id=465
You need to make sure the bar is centered that the sway bar mounts are as far apart as possible to get the bushing close to the bend. This will leave the bar no room to move side to side. I see this a lot with our bar as well.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Good advice moving the bushings out. Was also thinking of getting some 2-piece shaft collars to put on the outer sides.
