When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had a local shop to me build a 8.8 he said both side are about 2.5 inches shorter so we got 15x10 with 5.5 backspace billets the we cut the bump stops off and clearanced the lower part of the inner fender it sill rubs had to put a full 1 1/4 spacer just to get the car back on the ground I have a umi torque are we were only able to get the first set of bolts on the Hiltsy mount could get it slide the second set of bolt holes over. The torque arm hits the side of trans tunnel it hit both the back seat belt bolt and once we pulled that out it jammed itself into the side of the trans tunnel. Kinda of at a lost of what to do and out of funds for either a new rear or new wheels.
Last edited by Captaintroouble; Sep 30, 2024 at 10:23 AM.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.
Rear diff and torque arm issue 
