font suspention
#1
Launching!
Thread Starter
Join Date: Jun 2004
Location: nowhere
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
font suspention
Well the other day i looked at my passenger side front suspention. the bar that is parrel to the ground (control arm) ther is a bushing that runs up and down (closet to passenger floor pan) i need to replace that cuase my car clunks when it goes over bumps and my car like someimes will pull it self to the side when its going down the road. i went to gm to order that bushing and they said i had to order the whole control arm which is 200 bucks. i was like f that. is there anyway to do this cheaper. if you guys need pics tell me
#2
TECH Senior Member
iTrader: (14)
If that bushing is toast, chances are the other one is close and the lower ball joint would be suspect as well.
I got 1LE lower control arms from Dal for $130 each side ... new bushings and new ball joint were included ...
To answer your question directly, Thunder sells poly bushing kits for lower A-Arms.
I got 1LE lower control arms from Dal for $130 each side ... new bushings and new ball joint were included ...
To answer your question directly, Thunder sells poly bushing kits for lower A-Arms.