Help Torque arm troubles
Thread Starter
Teching In
Joined: Jan 2005
Posts: 6
Likes: 0
Help Torque arm troubles I just put a new adj torque arm on my car and it seems to want to clang an pop alot on accell and decell . I put the angle finder on the bottom of the torque arm and it looks like it has 3 or 4 degrees not sure if it is negative or positive though looking at the angle finder the neddle is going clock wise to about 3 or 4 is this right. Thanks alot
BOSS APPROVED!
The clunking noise is normal with the Spohn T/A. But of more concern is your pinion angle. Did you set the pinion angle? I would definitely do some research on just how to exactly set your pinion angle, and what the degree mesurements you are taking really mean.
For starters go Here or Here
If you don't feel comfortable doing this yourself - then definitely have it done professionally. You'll kick youself in the A$$ if you let it run too long with the angle incorrect.
For starters go Here or Here
If you don't feel comfortable doing this yourself - then definitely have it done professionally. You'll kick youself in the A$$ if you let it run too long with the angle incorrect.
