unlevel lowering
Thread Starter
TECH Apprentice
iTrader: (5)
Joined: Sep 2005
Posts: 320
Likes: 0
From: VIRGINIA BEACH
unlevel lowering I know this is a common topic but the search button is not working on my pc. I lowered my car 6 months ago with spring tech springs (2" drop). after the spings settled the right side sat lower then the left. So I thought it was just the cheap springs. So I found a set of intrax and tried them (2" drop)
well i got the same results. So now I wanted to raise my car a little for long tubes and 17x11's. So i got the hotchkis springs (1" drop) well the same thing happened again but its a little worse at times. Depends on how i park. Do i need some relocation stuff or will an adjustable panhard rod take care of it. Im out of ideas. I will not resort going back to 4x4 stock. I have new monroe sesnsatrac up font and gas adjust KYB in the rear.
thank you
Tim
well i got the same results. So now I wanted to raise my car a little for long tubes and 17x11's. So i got the hotchkis springs (1" drop) well the same thing happened again but its a little worse at times. Depends on how i park. Do i need some relocation stuff or will an adjustable panhard rod take care of it. Im out of ideas. I will not resort going back to 4x4 stock. I have new monroe sesnsatrac up font and gas adjust KYB in the rear.
thank you
Tim
Same with mine but I have had my Eibach pro-kits for almost 6 years now and just started noticing it about a month ago. The drivers side all 26.75" and the passenger side is all 26.25". I wouldn't think a half inch would be that noticable but it is.
Thread Starter
TECH Apprentice
iTrader: (5)
Joined: Sep 2005
Posts: 320
Likes: 0
From: VIRGINIA BEACH
Originally Posted by 01 Red WS6
it's common with our cars. I put some spacers from the auto parts store in the side that is lower and it's fine now
yeah thats what I did and it seems ok.
