help on lowering springs
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
help on lowering springs
hey all, just wanted some feedback on which springs i should go with. I currently have sprotlines with stock shocks (i bought it unknowingly like that!!) and will be getting Koni SA's. I have dual exhaust with cutouts under the rear axle. I definately want to raise the camaro (99 z28) a bit and was thinking of:
1. eibach pro-kit
2. hotchkis
3. h&r
i want about a 1.5" drop (can this be done with hotchkis on the lower mounts?) the car is a daily driver so nothing that will ride too harsh, but will still handle well.
thanks!
1. eibach pro-kit
2. hotchkis
3. h&r
i want about a 1.5" drop (can this be done with hotchkis on the lower mounts?) the car is a daily driver so nothing that will ride too harsh, but will still handle well.
thanks!
#2
TECH Senior Member
iTrader: (4)
I'd do the hotchkiss on the standard mounts. If you go to the lower mounts, you'll be way too low (probably sportline low or worse). The H&R's have rear springs that are a bit stiff for my tastes (I have H&R fronts, but I changed the rears to ground controls) and the rear is a bit low. So, I'd try the Hotchkiss for your application. I think you'll be pleased with the results (but use the stock, upper perch).