A-arm install help!! Please...
#1
Staging Lane
Thread Starter
Join Date: Feb 2002
Location: Virgin Beach, VA.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am installing upper and lower A-arms this weekend and have a few questions about the lower A-arms especially....
I bought the BMR lower A-arms. They have an adjustable swivel mount on one of the arms. How should I set this when installing the arms? I know I need an alignment after installing but a good starting point would help as I am installing them in my garage (along with uppr A-arms, sway bars, torque rod, new tires and rims.
Should I grease the bearings at the frame mount?
Any tricks or any install secrets?
Thanks,
Jeff
I bought the BMR lower A-arms. They have an adjustable swivel mount on one of the arms. How should I set this when installing the arms? I know I need an alignment after installing but a good starting point would help as I am installing them in my garage (along with uppr A-arms, sway bars, torque rod, new tires and rims.
Should I grease the bearings at the frame mount?
Any tricks or any install secrets?
Thanks,
Jeff