Adjustable PHR problems...

Reply Subscribe

Thread Tools

Search this Thread

Aug 31, 2006 | 01:58 PM

Somebody09

Thread Starter

TECH Resident

Joined: Dec 2004

Posts: 905

Likes: 0

Adjustable PHR problems...

So I bought this double adjustable panhard rod because apparently you need it when lowering the car... except my skills suck ***. The springs lowered about 1" and i adjusted the new PHR to the stock length before I installed it. My axel was not centered... so I shortened it about 1½" and it's still off... it doesn't seem to be working!

Do I shorten or lengthen the PHR if my cars wheels look exactly like this?

It doesn't poke out that far, but just so you understand

Thanks!

Aug 31, 2006 | 03:17 PM

BitViper

TECH Addict

iTrader: (63)

Joined: Dec 2004

Posts: 2,343

Likes: 2

From: Sandy Ego, Ca.

lengthen it...body needs to be moved back to the passenger side

Sep 2, 2006 | 06:36 PM

Somebody09

Thread Starter

TECH Resident

Joined: Dec 2004

Posts: 905

Likes: 0

Quote:

Originally Posted by BitViper

lengthen it...body needs to be moved back to the passenger side

Thanks, I'll give it a shot.

Sep 2, 2006 | 06:44 PM

Fulton 1

TECH Junkie

iTrader: (9)

Joined: Dec 2001

Posts: 3,326

Likes: 0

From: WA

Quote:

Originally Posted by BitViper

lengthen it...body needs to be moved back to the passenger side

Quote:

Actually the PHR would need to be SHORTENED if the axle is off relative to the car is as shown in this pic. Body attach on pax side and axle attach on driver side - shortening the rod will pull the body toward the pax side.

Sep 2, 2006 | 07:35 PM

felton316

TECH Addict

Joined: Nov 2001

Posts: 2,593

Likes: 0

From: TEXAS

The lower you go, the more you have to shorten it from stock length.

Reply Subscribe