Justin00SS

iTrader: (5)

I just got my car back up to stock height and I'm thinking about leaving the stock springs in the rear and putting eibachs up front.

Then some 17x11s w/ 315s out back.

99FBODY

iTrader: (8)

here my stance with stock springs in the back with QA1 springs in the front and QA1 shocks all the way around

96silverram

iTrader: (12)

Here's a shot from the summer (I had the nose off working on the HID's :L )






Lots of suspension work....

Intragration

iTrader: (1)

I think my suspension is stock... I haven't had the time or money to start modding until now. The ride is actually pretty poor for a 40k mile WS6, especially at highway speeds and under hard braking. (This is f-body #4, for reference: previously wrecked stock '94 Z28, stock '97 TA, stock '96 SS all behaved better) I'm planning to stay with stock springs and swap out whatever shocks are on there now with Bilstein HDs. Those awful tires might also have something to do with it, they're going in the trash soon too.

DroppedM6Z

iTrader: (5)

Mines Stock....

00slowredz

DroppedM6Z that is one fine looking f body

i think my suspension is stock but everyone says my backend looks high
sorry for the bad pic

http://s128.photobucket.com/albums/p...maroleft-1.jpg

CamaroTrish

stock height...ill get pictures after i put in the eibach pro kits, kyb agx's, adj. panhard and control arm brackets

Carlos01SS

iTrader: (4)

Ride height from top of the fender is 26 1/8" front, 26 3/4" rear.

NOTAV6

iTrader: (3)

ive gotten a few compliments on the way mine sits
eibach pro-kit should be about the same with a pro-kit for ls1
thinking about doing the hose mod to level the rear out

NickcZ28

iTrader: (9)

uh bmrs..