Would this spring position (current mounting)clunk
Thread Starter
TECH Senior Member
iTrader: (4)
Joined: Nov 2001
Posts: 7,000
Likes: 1
From: Lexington, Ky
Would this spring position (current mounting)clunk I'm getting a clunk over every bump I hit in the road and it seems more prominent from the passenger rear. I looked under the car, exhaust is not moveable so it's not that, but I did notice the passenger spring sitting like this:
Would this cause a clunking sound?
Would this cause a clunking sound?
Re: Would this spring position (current mounting)clunk I would turn that spring 180 degrees to keep it on the perch. However, many people on here have had the "dreaded right rear clunk" and nobody seems to have figured out what actually is causing it. I added some compression damping to my Koni's and mine went away (I was tuning handling, it was just a nice bonus). That spring could make noise, but lots of cars have had the problem, so I don't think that's actually it. I'd spin that spring around, add some air to the air bag and see if it still does it. Good luck!
Re: Would this spring position (current mounting)clunk Your passenger side spring could be making contact with the panhard bar mount. Mine did when I adjusted my Torque Arm the wrong way. I'd say try to get the spring better ocated on the spring perch.
