Sfc
Make sure you grind off the power coat paint on the SFC and grind the surface on the actual frame for a good clean weld. Make sure you have two jacks on each end. I also welded a section of the middle to the frame. Didn't want it to be weak.
I don't know if you're doing this on a lift, or on stands. However, try to have the suspension loaded as much as possible. Any chassis deformation present when the suspension is loaded, and static, should be present when installing the connectors.
I agree.
You don't want to jack in any other deformation or stresses when you weld in the connectors.
yea we have a lift in our camaro garage. so it will be a loaded suspension. i plan on just jacking light pressure on the SFC just to make sure its got pressure on it when i weld it in.
TECH Apprentice
Joined: Nov 2001
Posts: 329
Likes: 0
From: SoFla
Also, don't forget the undercoating or paint to match to prevent rust.
