Centering M9 help
#1
On The Tree
Thread Starter
iTrader: (13)
Join Date: Feb 2006
Location: Lubbock, TX
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Centering M9 help
I was having issues with my M9 not being centered in the car so I purchased a set of Spohn Adj. LCA's. My question is where is the best reference point to measure center? I used the lower panel line to tire which was accurate, but when measuring from fascia to tire it's off by a .25". The pinion angle is set at -2 also. I'm just trying to get the suspension set for better traction and any help would be appreciated!
RR-frt 1.5", r 2.25"
RL-frt 1.5", r-2"
I'm assuming the rear point is not a good place for accuracy?
RR-frt 1.5", r 2.25"
RL-frt 1.5", r-2"
I'm assuming the rear point is not a good place for accuracy?
#2
TECH Fanatic
iTrader: (9)
Join Date: Apr 2008
Location: Tampa,Florida
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
You are better off measuring to the front side of the wheel well to the metal portion. If you want to give me a call here at the office I would be more than happy to go over any questions you might have