THE OFFICIAL Pay It Forward thread
I HAVE:
F-body LS1 Knock sensor part number 25369811 Gone!!
F-body LS1 4L60E Shifter cable
98-02 Trans Am factory rear side markers Gone!!
**Updated**
F-body LS1 Knock sensor part number 25369811 Gone!!
F-body LS1 4L60E Shifter cable
98-02 Trans Am factory rear side markers Gone!!
**Updated**
Last edited by REDDRAGON14; Mar 2, 2010 at 09:37 AM. Reason: Updating list of stuff still available
93-02 white camaro hatch no spoiler
93-02 camaro smoked corners and side markers
LT1 head with rockers springs and spark plugs
93-02 camaro black tailight covers
tinted license plate cover
pickup only
I'm north of Dallas
93-02 camaro smoked corners and side markers
LT1 head with rockers springs and spark plugs
93-02 camaro black tailight covers
tinted license plate cover
pickup only
I'm north of Dallas
hmmm...Let's see,,this is what I know I have that I don't need..
Stock unported LT1 intake manifold
Stock unported LT1 Throttle Body
Ls1 4l60E..(needs a rebuild as it was slipping in the 2-3 shift under WOT)
3 Gunmetal ZR1s (2) 17x9.5's (1) 17x11. ~Gone~
Factory Front Sway bar
LT1 Radiator
LT1 Electric Fans
Factory LT1 Manifolds
Factory LT1 Y-pipe
Factory LT1 mid pipe
MSD LT1 Blaster Coil (little use roughly 75miles)
Few Tan Interior panels(both kick panels, rear hatch compartment covers..will have to check for specific ones)
Stock LT1 Lifters
Factory LT1 Valve covers
LT1 Water pump..(granted I can find it)
Stock unported LT1 intake manifold
Stock unported LT1 Throttle Body
Ls1 4l60E..(needs a rebuild as it was slipping in the 2-3 shift under WOT)
3 Gunmetal ZR1s (2) 17x9.5's (1) 17x11. ~Gone~
Factory Front Sway bar
LT1 Radiator
LT1 Electric Fans
Factory LT1 Manifolds
Factory LT1 Y-pipe
Factory LT1 mid pipe
MSD LT1 Blaster Coil (little use roughly 75miles)
Few Tan Interior panels(both kick panels, rear hatch compartment covers..will have to check for specific ones)
Stock LT1 Lifters
Factory LT1 Valve covers
LT1 Water pump..(granted I can find it)
I believe they were done with hobby paint. Send me a PM And we can try to work out shipping. I can also get some pictures of them tomorrow.
Last edited by irbs; Jan 26, 2010 at 09:18 AM.
I have in Houston (not shipping anything). All from a 99SS.
-A/c system (all but compressor, should have all lines/hoses/condensor/etc).
-Air bag
-Monsoon amp (Have to check but pretty sure I have this still)
I'll look around to see if I have anything else lying around for a 4th gen.
William
-A/c system (all but compressor, should have all lines/hoses/condensor/etc).
-Air bag
-Monsoon amp (Have to check but pretty sure I have this still)
I'll look around to see if I have anything else lying around for a 4th gen.
William
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Enthusiast
iTrader: (12)
Joined: Jan 2004
Posts: 586
Likes: 0
From: South East Houston
Also, I found a spare gas cap if anybody needs one.
Last edited by slow96z; Jan 24, 2010 at 10:04 PM.
Staging Lane
Joined: May 2008
Posts: 92
Likes: 0
From: Tucson, AZ
I have:
Stock Z28 catback, cut at the bend over the axle.
Random bolts
stock springs "136k miles on them lol" but were good when taken off. *1-24-10*
some others i cant think of, ill update when i get home.
I need:
Ls6 intake/fast lol
40+ lb injectors
maybe someone to help me install my stall and gears =)
<3
Stock Z28 catback, cut at the bend over the axle.
Random bolts
stock springs "136k miles on them lol" but were good when taken off. *1-24-10*
some others i cant think of, ill update when i get home.
I need:
Ls6 intake/fast lol
40+ lb injectors
maybe someone to help me install my stall and gears =)
<3
[QUOTE=jvlz28;12787413]Used 315 17 35 Nitto 555R. These are worn down anyone need them for rollers or some track passes? Will not ship, picked up in Houston only.
if they are not already gone ill take them PM me
if they are not already gone ill take them PM me
Thread Starter
TECH Enthusiast
iTrader: (12)
Joined: Jan 2004
Posts: 586
Likes: 0
From: South East Houston
[QUOTE=shedijames;12803686]I'm already in contact with him, hoping to pick them up this weekend.
I have a pair of Nitto 315-35-17 Drag radials, they are pretty worn down in the middle but they still hook up good. Pick up preffered!
I need the plastic lock cover for the driver side door panel....I guess passanger side would work too.
thanks!
I need the plastic lock cover for the driver side door panel....I guess passanger side would work too.
thanks!