THE OFFICIAL Pay It Forward thread
if anyone want the stock internals from a 10 bolt let me know, i replaced everyting in mine so i have the stock locker, 2.73 gears, diff cover and axles laying around... also have stock front turn signals too amd stock LCA'a
edit: also have all 4 stock rotors and pads that are still good
edit: also have all 4 stock rotors and pads that are still good
Last edited by 94TRANS; Feb 1, 2010 at 11:19 PM.
I would be interested, I've got ugly *** open ended ones, mismatched too.
Thread Starter
TECH Enthusiast
iTrader: (12)
Joined: Jan 2004
Posts: 586
Likes: 0
From: South East Houston
I've got a broken DS OEM 98-02 firebird fender. It's silver in color. It's repairable (multiple body shops have told me this) but I have no need for it.
I'd really like to get rid of it. So if anyone knows someone who does body work, or might want it, please let me know.
Can send pics of damaged area if needed.
I'd really like to get rid of it. So if anyone knows someone who does body work, or might want it, please let me know.
Can send pics of damaged area if needed.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Not really car related, but I do have some free crap that could help anyone doing some work around the house.
1 sheet of roofing type plywood (large shreds pressed into a sheet)
2 pieces of wide (3 5/8") crown molding
1 large solid wood desk top, would make a good work bench top. 3'x5' approx
Free 10-bolt housing with welded on Reloc brackets, no guts just the housing. would be good if you had a grinder and wanted LCA relocation brackets.
I am down in Dickinson tx and have no way to get this to anyone. PICK UP ONLY
1 sheet of roofing type plywood (large shreds pressed into a sheet)
2 pieces of wide (3 5/8") crown molding
1 large solid wood desk top, would make a good work bench top. 3'x5' approx
Free 10-bolt housing with welded on Reloc brackets, no guts just the housing. would be good if you had a grinder and wanted LCA relocation brackets.
I am down in Dickinson tx and have no way to get this to anyone. PICK UP ONLY
I have a used aftermarket front sway bar. Its red. I dont know the size, and I dont know the manufacturer. You would need to use your endlinks or some others, mine are no good. I have a stock LS1 oil pump, 60K on it. I also have some Texas Speed 7.425 hardened pushrods. They have maybe 150 miles on them. I also have the stock set of springs, seats, and retainers, as well as the stock pushrods.
Dont know of anything I need. Ill keep an eye out on this post.
ALL OF IT GONE
Dont know of anything I need. Ill keep an eye out on this post.
ALL OF IT GONE
