unassembled 408 engine
unassembled 408 engine Health reasons forces cancellation of an iron block 408 project. All parts necessary for assembly of an Eagle-based kit. Block has been bored and prepped; heads CNC ported; rotating assembly balanced by Wells Racecraft. Priced to move at $3250. Pick up in N. Dallas. Call Dub at 214-859-9412 or email wholloway@swst.com
more info The crank assy was bought from Keith Craft in Plano, who did the block (bored 4.030, line bored, prepped and painted silver), and CNC ported the truck heads (they are LQ4s, I think, with the slight dish). Pistons are JE that have been moly and ceramic coated and have a 20cc dish. Rings are Total Seal from Summit. Rods are H-beam Eagle units. I had the rotating assembly rebalanced by Wells Machine Shop. Compression should be under 11:1. I have not cc’d the heads. Main cap studs are ARP. The cam I have for it is a Z06. The engine will need rockers and lifters, as I would not reuse the old ones. I have gaskets and seals, a truck computer and wiring harness, manifolds and accessories. No idea what power it will turn out, but the torque will be substantial.
