Complete LT1 Performance Engine Part Out
05-02-2011, 09:22 AM
#47
TECH Resident
Thread Starter
iTrader: (12)
Join Date: Apr 2006
Location: Lantana, TX
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
I bought it thinking it would be plug and play with only the oil level sensor missing. After I got it, it was apparent that it had been used on a carb'd motor because the O2 sensors were missing as well as the MAF and knock sensor. I also had to change the coil connector because it was setup for an old school coil instead of a LT1. Everything is wired back together, except the oil level sensor and the starter relay wire. The passenger side has been extended for LTs but not the driver side. I never fired the motor or put my scanner on it, so I don't know if everything worked correctly.
Edit: Yes 97 M6
Edit: Yes 97 M6
06-07-2011, 04:06 PM
#56
TECH Resident
Thread Starter
iTrader: (12)
Join Date: Apr 2006
Location: Lantana, TX
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Don't think I mentioned it but the SB has been disassembled since someone wanted the block. The rods/pistons are still together and the crank is out as well obviously and for sale if someone wants them. They were a balanced assembly and have been numbered before disassembly is someone wants a balanced RA ready to go.
