GI 2002 SS clone
Thread Starter
Joined: Feb 2007
Posts: 639
Likes: 0
From: Fort Hood TX. 76522
GI 2002 SS clone I keep thinking I need a Corvette. In order to do that I need to sell my Camaro. It has a ton of mods. I have a clean title in my name. Right now its down. The #6 cylinder filled up with coolant but the other 7 are fine. I ordered and paid for a 6.0 shortblock already, which can be included.
mod list:
TFS heads
92mm F.A.S.T intake
92 TB.
coil relocation
custom cam
Harland Sharp 1.7 rockers.
Brand new LS7 clutch
rebuilt T-56
tubular k member and control arms
Bilstien HD struts and shocks
Hotchkiss lowering springs
tubular tq arm
solid sway bars
Hawk brakes/pads and steel lines on all 4 corners
adjustable pan hard bar
SFC weld on
TSP True dual Xpipe with Spiralflows
Kooks headers
12 bolt 4 channel with 4.10 gears.
Trans Am seats with the lumbar and bolster hooked up.
Interior is about a 9 out of 10 with very few blemishes the dash pad is NOT cracked. Exterior is clean, but would give it a 7 out of 10. has some chips and some peeling clearcoat. Most of these mods are less than 1 year old, maybe 1500 miles on them. Clean car that is ready for whatever engine you have for it, or use the 6.0 I paid for. I'm gonna start pricing at $9500. NO PART OUTS DON'T ASK. Can email pictures. The silver car in the my picture is my car. I have a lot of extra parts that can go with the car.
mod list:
TFS heads
92mm F.A.S.T intake
92 TB.
coil relocation
custom cam
Harland Sharp 1.7 rockers.
Brand new LS7 clutch
rebuilt T-56
tubular k member and control arms
Bilstien HD struts and shocks
Hotchkiss lowering springs
tubular tq arm
solid sway bars
Hawk brakes/pads and steel lines on all 4 corners
adjustable pan hard bar
SFC weld on
TSP True dual Xpipe with Spiralflows
Kooks headers
12 bolt 4 channel with 4.10 gears.
Trans Am seats with the lumbar and bolster hooked up.
Interior is about a 9 out of 10 with very few blemishes the dash pad is NOT cracked. Exterior is clean, but would give it a 7 out of 10. has some chips and some peeling clearcoat. Most of these mods are less than 1 year old, maybe 1500 miles on them. Clean car that is ready for whatever engine you have for it, or use the 6.0 I paid for. I'm gonna start pricing at $9500. NO PART OUTS DON'T ASK. Can email pictures. The silver car in the my picture is my car. I have a lot of extra parts that can go with the car.
Last edited by JohnFrazee02SS; Jul 2, 2013 at 10:46 AM.
