G Force Rocks!!!
Thread Starter
Administrator
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
G Force Rocks!!! Thanks G Force for helping me with my SS! 
I've had a P0336 crank sensor issues for a few months and I had no luck fixing it myself. From new/used crank sensor to a new pigtail I still had issues. Greg at G Force did a great job finding out the issue at hand. Not only was my crank sensor bad but my solder job was not good enough.
So thanks again G Force for an outstanding job finding and fixing my crank sensor problems!
~ Craig
I've had a P0336 crank sensor issues for a few months and I had no luck fixing it myself. From new/used crank sensor to a new pigtail I still had issues. Greg at G Force did a great job finding out the issue at hand. Not only was my crank sensor bad but my solder job was not good enough.
So thanks again G Force for an outstanding job finding and fixing my crank sensor problems!
~ Craig
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
On The Tree
Joined: Nov 2008
Posts: 157
Likes: 0
Thanks G Force for helping me with my SS!
I've had a P0336 crank sensor issues for a few months and I had no luck fixing it myself. From new/used crank sensor to a new pigtail I still had issues. Greg at G Force did a great job finding out the issue at hand. Not only was my crank sensor bad but my solder job was not good enough.
So thanks again G Force for an outstanding job finding and fixing my crank sensor problems!
~ Craig
I've had a P0336 crank sensor issues for a few months and I had no luck fixing it myself. From new/used crank sensor to a new pigtail I still had issues. Greg at G Force did a great job finding out the issue at hand. Not only was my crank sensor bad but my solder job was not good enough.
So thanks again G Force for an outstanding job finding and fixing my crank sensor problems!
~ Craig
This shop does nice work and takes very good care of their customers. There are a lot of shops out there that do great work. Customers (repeat) want a combination of work ethics, timing, pricing etc etc. G-Force has it all!!! This shop does not load cars up in their shop and hold them for months. They take in what they can get out in a hurry. I like that in a shop. This shop will take any job on from a basic shock install to a complete engine install so you don't have to feel like you need to spend 100k for Mike to take you in. Mike and the guy's are stand up group and you will not be disapointed so give them a try!!!!
Just wished you were closer....
I speak from experience and I have been around for a while in this game and honesty goes a long way in my book...
I know where you are coming from CRAGER!!!!
Just wished you were closer....
I speak from experience and I have been around for a while in this game and honesty goes a long way in my book...
I know where you are coming from CRAGER!!!!
Last edited by BADZ; Sep 12, 2009 at 08:30 PM.
The guys at G-Force have been there for me whenever I needed them! Whether it be a day on the dyno or a 52hr stent at the shop getting the car ready for a race. I've been around the shop for the last 8 years and have never regretted taking anything there or doing anything for them. Even if it was skipping class so I can teach Mike to use the dyno 
Mike, Jay, Juanito, Greg, and Robert are the men to go to if you want some quality work that's for sure!
Congrats Craig! I'm glad they got you taken care of quickly!
PS Mike remember walking into the shop on this morning!
Mike, Jay, Juanito, Greg, and Robert are the men to go to if you want some quality work that's for sure!Congrats Craig! I'm glad they got you taken care of quickly!
PS Mike remember walking into the shop on this morning!
The guys at G-Force have been there for me whenever I needed them! Whether it be a day on the dyno or a 52hr stent at the shop getting the car ready for a race. I've been around the shop for the last 8 years and have never regretted taking anything there or doing anything for them. Even if it was skipping class so I can teach Mike to use the dyno Mike, Jay, Juanito, Greg, and Robert are the men to go to if you want some quality work that's for sure!
Congrats Craig! I'm glad they got you taken care of quickly!
PS Mike remember walking into the shop on this morning!
Mike, Jay, Juanito, Greg, and Robert are the men to go to if you want some quality work that's for sure!Congrats Craig! I'm glad they got you taken care of quickly!
PS Mike remember walking into the shop on this morning!
It's going good, still not fully setup in certain areas (Mainly my office LOL). If you are ever in the area give me a shout and maybe we can go grab a beer somewhere man. Haven't seen you in awhile!
TECH Fanatic
Joined: Jan 2005
Posts: 1,196
Likes: 0
From: Pearland, TX
Heard about your fun night breaking down on the beltway at drunk hour.......Im sure that was not fun....Glad its back up and running Craig....
I gotta check out the crib Powell, you live literally around the corner now.....
I gotta check out the crib Powell, you live literally around the corner now.....