few runs in my ss
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: houston tx
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
few runs in my ss
So we finaly got my car up n running n tested it while tuning it against my buddys cammed silverado. My car is cammed/stalled auto with bolt ons. Id like to say im very satisfied with the LG g5x2 cam. I kno i need some stickier tires lol.
1st run was a 30roll but let go cause i went sideways
2nd run was a 30 roll without downshifting
3rd was a 60 roll straight off of drive.
Still has a couple of bugs to get worked on but its getting there. 100% home built+tuning.
1st run was a 30roll but let go cause i went sideways
2nd run was a 30 roll without downshifting
3rd was a 60 roll straight off of drive.
Still has a couple of bugs to get worked on but its getting there. 100% home built+tuning.
#4
TECH Veteran
iTrader: (40)
45-50 is a great 2nd gear roll speed for an auto. 25-30 in first if you have real good tires, and around 70 for a 3rd gear roll. Of course that all depends on what gears you have.
By the way, what kind of wheels are those, I like em. Have a pic?
Trending Topics
#8
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: houston tx
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
That is a 5.3 truck but it runs damn good. Takes on most bolt on cars n cammed 6.0 singlecabs. Especialy when my *** is just sitting there spinning those 315s like if they were on water. The car still isnt 100% like i stated. It was just some fun runs to see the difference the cam made since we used to be neck to neck before my cam swap.
#13
TECH Veteran
iTrader: (40)
That is a 5.3 truck but it runs damn good. Takes on most bolt on cars n cammed 6.0 singlecabs. Especialy when my *** is just sitting there spinning those 315s like if they were on water. The car still isnt 100% like i stated. It was just some fun runs to see the difference the cam made since we used to be neck to neck before my cam swap.
Love the wheels, can I has them? Pretty please
The answer is yes cause I said please....right?
#17
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: houston tx
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
The truck has some ***** for sure he used to hit 14.2 all dayy in summer heat with a tune and k&n kit. Everything done to it was done at home also by us including tuning. Crazy i used to go by preston all the time since my sis in law lives infront of rayburn. Then i worked at shell in deer park for 10 months and worked at the shell colex on bearl for 2 months lol. And my gf lives off shaver.
#18
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: houston tx
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Acctualy he has that tsp 228 cam on a 112 lsa. Truck has nasty low end torque. His previous cam was a small barely noticeable cam i think it was like a .214, .216 on a 114 lsa n he squeezed out 305 hp on the dyno without headers and a converter. I kno my car doesnt surprise yall but it surprised the **** out of me. Im sure i can hit a high 11 cause bone stock id hit 13.1s all day. All i need is some sticky tires and get my tune 100% on. She spins into 3rd gear before it would only spin 1st gear n partial 2nd