FS: Ported CNC heads
#1
On The Tree
Thread Starter
Join Date: Jul 2002
Location: Dallas-Fort Worth, Texas
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
FS: Ported CNC heads
FS: Ported CNC heads
These heads are #317 castings, RPM had them ported by Pete at CNC these are the same heads on Old Man's car on his 408, I dont have the specs but RPM has them, these are BRAND NEW not used and I am going to sell them for
1750
Specs are 2.055 intake valves, 1.600 Exhaust valves, the chambers are right at 59-60ccs, Rev dual springs and they are milled for a higher compression
I paid 2000 plus shipping plus the cost of the heads which was 300 so all together I paid around 2400-2500 So this Is a killer deal
These heads are #317 castings, RPM had them ported by Pete at CNC these are the same heads on Old Man's car on his 408, I dont have the specs but RPM has them, these are BRAND NEW not used and I am going to sell them for
1750
Specs are 2.055 intake valves, 1.600 Exhaust valves, the chambers are right at 59-60ccs, Rev dual springs and they are milled for a higher compression
I paid 2000 plus shipping plus the cost of the heads which was 300 so all together I paid around 2400-2500 So this Is a killer deal