Stuff for sale... local preferably
Stuff for sale... local preferably.. more added I've decided to sale my car and figure i'll part out a few things first. The longer it takes to sale the car.. the more things i'll remove from the car. For now here is what I have. If anyone needs pics, i'll have them tonight or tommorrow.
Nos wet kit.. custom built. This is basicly a TNT style kit. I built it before TNT started selling there kit. This kit was on my ss that was stolen and i havent used it since. It has had about 15 bottles at most through it. Comes with the large line. about 3/4 inch i think, from the bottle to the engine. Enough line to go from the spare tire to the engine with slack left over. There is a T in the line where it splits off behind the panel beside the glove compartment. One side goes into the engine comparment and the other goes to a carbonfiber pressure gauge that mounts inside of the glove compartment. The gauge is very nice looking and is in perfect shape. I also have a bottle heater. I have the large sylinoids.. i beleive they are pro shots.. part number on the nos one is 16045. Im not starring at the fuel one so i dont have the part number on it. I have a purge sylinoid also and the copper lines bent and t'd to shoot strait up behind the hood and small wire loom covers. There are 2 sets of small lines of 2 different sizes that hit 2 dual nozzles. Each nozzle will have fuel and nos merged into it. the nozzle's were origianly black but have been polished to shine. I'll include the old belou off the car with the hole in it if you want. There is a near perfect looking 10lb blue bottle and the brackets that hold it down. 2 relays. Hi'flow valve in the bottle. The only thing you will need is the wiring, its all balled up and you would probly want to run your own anyway. The micro switch.. it was in the car when it was stolen. I might be able to get you one.. not sure though. The brackets that hold the sylinoids to the intake manifold.. I have to that were hand made if you want them.. Mti broke my nice ones. Thats about it i think.. The pills are still installed. the only pills i have are for a 150 wet. My car dynoed 330rwhp with a lid and power proggrammer only on motor and did 486rwhp and 618ftlbs and went 11.40@124 on drag radials with a 2.0 60ft.
Thats prolly the best i can describe it. 300.00 for something that cost me 1k to build at the time.. about 3yrs ago.. its been in my closet for a long while.
UMI red tubular control arms. 200 miles on them.. Look brand spanking new. In a box and ready to ship if need be. $85.00 shipped 75.00 picked
up.
Harlan Sharp red shift light and 2 step. Harlan is out of business for now so im sure these will go fast. The light is black and lights up red. I have never used it or attempted to use it. Brand new with instructions. $55.00
The 2step is the 4th one he has ever built. It was bought from madman who got it from harlan years ago. It is brand spanking new with instructions and even still in the original box it was recievd in. Never attempted to use it. $150.00... both are sold
kenny brown 3way progressive lowering springs .. like new.. 125.00 http://www.lmperformance.com/3699/1.html
The rear will be comming out of the car soon, but may have a buyer. The Fast 90/90 will be up for sale also, very quickly. $700 and your ls6and throttle body. These are local only.
I have a G-tech pro if anyone wants it for 20.00 shipped. Its been out of the box once, but never used. In the origianl box and with instructions... sold
FTRA.. i bought it used.. the bottom mounting holes have been slightly worn, but its still in perfect working order and still looks nice. 50.00 if you come get it.
Dual electric fans from a 94 formula. Still work with no problem.. 75.00
2 15x8 draglites with 5 1/2 b.s. These have gone down the track only a hand full of times and were put away in the garage from an old car when it was stolen. 1 rim is in really good shape and the other some how gotten something on it and caused some spot blemishes that engraved itself in the aluminum. Any rim repair shop im sure could fix it if it bothered you. They are strait and have no problems when it comes to actual usage. 150.00 no shipping.
more to come..
Nos wet kit.. custom built. This is basicly a TNT style kit. I built it before TNT started selling there kit. This kit was on my ss that was stolen and i havent used it since. It has had about 15 bottles at most through it. Comes with the large line. about 3/4 inch i think, from the bottle to the engine. Enough line to go from the spare tire to the engine with slack left over. There is a T in the line where it splits off behind the panel beside the glove compartment. One side goes into the engine comparment and the other goes to a carbonfiber pressure gauge that mounts inside of the glove compartment. The gauge is very nice looking and is in perfect shape. I also have a bottle heater. I have the large sylinoids.. i beleive they are pro shots.. part number on the nos one is 16045. Im not starring at the fuel one so i dont have the part number on it. I have a purge sylinoid also and the copper lines bent and t'd to shoot strait up behind the hood and small wire loom covers. There are 2 sets of small lines of 2 different sizes that hit 2 dual nozzles. Each nozzle will have fuel and nos merged into it. the nozzle's were origianly black but have been polished to shine. I'll include the old belou off the car with the hole in it if you want. There is a near perfect looking 10lb blue bottle and the brackets that hold it down. 2 relays. Hi'flow valve in the bottle. The only thing you will need is the wiring, its all balled up and you would probly want to run your own anyway. The micro switch.. it was in the car when it was stolen. I might be able to get you one.. not sure though. The brackets that hold the sylinoids to the intake manifold.. I have to that were hand made if you want them.. Mti broke my nice ones. Thats about it i think.. The pills are still installed. the only pills i have are for a 150 wet. My car dynoed 330rwhp with a lid and power proggrammer only on motor and did 486rwhp and 618ftlbs and went 11.40@124 on drag radials with a 2.0 60ft.
Thats prolly the best i can describe it. 300.00 for something that cost me 1k to build at the time.. about 3yrs ago.. its been in my closet for a long while.
UMI red tubular control arms. 200 miles on them.. Look brand spanking new. In a box and ready to ship if need be. $85.00 shipped 75.00 picked
up.
Harlan Sharp red shift light and 2 step. Harlan is out of business for now so im sure these will go fast. The light is black and lights up red. I have never used it or attempted to use it. Brand new with instructions. $55.00
The 2step is the 4th one he has ever built. It was bought from madman who got it from harlan years ago. It is brand spanking new with instructions and even still in the original box it was recievd in. Never attempted to use it. $150.00... both are sold
kenny brown 3way progressive lowering springs .. like new.. 125.00 http://www.lmperformance.com/3699/1.html
The rear will be comming out of the car soon, but may have a buyer. The Fast 90/90 will be up for sale also, very quickly. $700 and your ls6and throttle body. These are local only.
I have a G-tech pro if anyone wants it for 20.00 shipped. Its been out of the box once, but never used. In the origianl box and with instructions... sold
FTRA.. i bought it used.. the bottom mounting holes have been slightly worn, but its still in perfect working order and still looks nice. 50.00 if you come get it.
Dual electric fans from a 94 formula. Still work with no problem.. 75.00
2 15x8 draglites with 5 1/2 b.s. These have gone down the track only a hand full of times and were put away in the garage from an old car when it was stolen. 1 rim is in really good shape and the other some how gotten something on it and caused some spot blemishes that engraved itself in the aluminum. Any rim repair shop im sure could fix it if it bothered you. They are strait and have no problems when it comes to actual usage. 150.00 no shipping.
more to come..
Last edited by leeluther252; May 27, 2005 at 06:56 PM.
TECH Fanatic
Joined: Mar 2003
Posts: 1,839
Likes: 0
From: La Porte, TX
PM me if the 90/90 is still available.
Originally Posted by leeluther252
I've decided to sale my car and figure i'll part out a few things first. The longer it takes to sale the car.. the more things i'll remove from the car. For now here is what I have. If anyone needs pics, i'll have them tonight or tommorrow.
Nos wet kit.. custom built. This is basicly a TNT style kit. I built it before TNT started saeeling there kit. This kit was on my ss that was stolen and i havent used it since. It has had about 15 bottles at most through it. Comes with the large line. about 3/4 inch i think, from the bottle to the engine. Enough line to go from the spare tire to the engine with slack left over. There is a T in the line where it splits off behind the panel beside the glove compartment. One side goes into the engine comparment and the other goes to a carbonfiber pressure gauge that mounts inside of the glove compartment. The gauge is very nice looking and is in perfect shape. I also have a bottle heater. I have the large sylinoids.. i beleive they are pro shots.. part number on the nos one is 16045. Im not starring at the fuel one so i dont have the part number on it. I have a purge sylinoid also and the copper lines bent and t'd to shoot strait up behind the hood and small wire loom covers. There are 2 sets of small lines of 2 different sizes that hit 2 dual nozzles. Each nozzle will have fuel and nos merged into it. the nozzle's were origianly black but have been polished to shine. I'll include the old belou off the car with the hole in it if you want. There is a near perfect looking 10lb blue bottle and the brackets that hold it down. 2 relays. Hi'flow valve in the bottle. The only thing you will need is the wiring, its all balled up and you would probly want to run your own anyway. The micro switch.. it was in the car when it was stolen. I might be able to get you one.. not sure though. The brackets that hold the sylinoids to the intake manifold.. I have to that were hand made if you want them.. Mti broke my nice ones. Thats about it i think.. The pills are still installed. the only pills i have are for a 150 wet. My car dynoed 330rwhp with a lid and power proggrammer only on motor and did 486rwhp and 618ftlbs and went 11.40@124 on drag radials with a 2.0 60ft.
Thats prolly the best i can describe it. 300.00 for something that cost me 1k to build at the time.. about 3yrs ago.. its been in my closet for a long while.
UMI red tubular control arms. 200 miles on them.. Look brand spanking new. In a box and ready to ship if need be. $90.00 shipped 80.00 picked
up.
Harlan Sharp red shift light and 2 step. Harlan is out of business for now so im sure these will go fast. The light is black and lights up red. I have never used it or attempted to use it. Brand new with instructions. $55.00
The 2step is the 4th one he has ever built. It was bought from madman who got it from harlan years ago. It is brand spanking new with instructions and even still in the original box it was recievd in. Never attempted to use it. $150.00
kenny brown 3way progressive lowering springs .. like new.. 150.00 http://www.lmperformance.com/3699/1.html
The rear will be comming out of the car soon, but may have a buyer. The Fast 90/90 will be up for sale also, very quickly. $700 and your ls6and throttle body. These are local only.
more to come..
Nos wet kit.. custom built. This is basicly a TNT style kit. I built it before TNT started saeeling there kit. This kit was on my ss that was stolen and i havent used it since. It has had about 15 bottles at most through it. Comes with the large line. about 3/4 inch i think, from the bottle to the engine. Enough line to go from the spare tire to the engine with slack left over. There is a T in the line where it splits off behind the panel beside the glove compartment. One side goes into the engine comparment and the other goes to a carbonfiber pressure gauge that mounts inside of the glove compartment. The gauge is very nice looking and is in perfect shape. I also have a bottle heater. I have the large sylinoids.. i beleive they are pro shots.. part number on the nos one is 16045. Im not starring at the fuel one so i dont have the part number on it. I have a purge sylinoid also and the copper lines bent and t'd to shoot strait up behind the hood and small wire loom covers. There are 2 sets of small lines of 2 different sizes that hit 2 dual nozzles. Each nozzle will have fuel and nos merged into it. the nozzle's were origianly black but have been polished to shine. I'll include the old belou off the car with the hole in it if you want. There is a near perfect looking 10lb blue bottle and the brackets that hold it down. 2 relays. Hi'flow valve in the bottle. The only thing you will need is the wiring, its all balled up and you would probly want to run your own anyway. The micro switch.. it was in the car when it was stolen. I might be able to get you one.. not sure though. The brackets that hold the sylinoids to the intake manifold.. I have to that were hand made if you want them.. Mti broke my nice ones. Thats about it i think.. The pills are still installed. the only pills i have are for a 150 wet. My car dynoed 330rwhp with a lid and power proggrammer only on motor and did 486rwhp and 618ftlbs and went 11.40@124 on drag radials with a 2.0 60ft.
Thats prolly the best i can describe it. 300.00 for something that cost me 1k to build at the time.. about 3yrs ago.. its been in my closet for a long while.
UMI red tubular control arms. 200 miles on them.. Look brand spanking new. In a box and ready to ship if need be. $90.00 shipped 80.00 picked
up.
Harlan Sharp red shift light and 2 step. Harlan is out of business for now so im sure these will go fast. The light is black and lights up red. I have never used it or attempted to use it. Brand new with instructions. $55.00
The 2step is the 4th one he has ever built. It was bought from madman who got it from harlan years ago. It is brand spanking new with instructions and even still in the original box it was recievd in. Never attempted to use it. $150.00
kenny brown 3way progressive lowering springs .. like new.. 150.00 http://www.lmperformance.com/3699/1.html
The rear will be comming out of the car soon, but may have a buyer. The Fast 90/90 will be up for sale also, very quickly. $700 and your ls6and throttle body. These are local only.
more to come..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
