To install lowering springs on a camaro? I am fixing to have it done.

 

A little more than you expect once you have to buy a new mount (?)for the passenger side I believe. Mine was about 150 for labor plus some extra for the other bs. Do it yourself, or save you some money and do the rear yourself, I just didnt have the time. It wont take but 30-60 min for the rear.

Oh yeah and if ride quality is an issue, you must do revalved shocks or you will be feeling the hurt when you drive. Its not THAT bad, but its noticable. BTW what springs? I'm using Hotchkis and no clearence issues with lt's and ory, Ive rubbed once but it couldnt be helped.

 

We charge 350.00 for the install.

 

I did my own rears and it was easy. The front cost me 75 a side which I did not think was to bad.

 

damn thats expensive!

 

where are you located at ?

 

Richmond Tx

 

do the rears your self their very easy. The fronts should run you about $100-$150 for both sides.

 

I paid my local mieneke 125.00 to install all four springs and bilstiens.

later.

 

Shiitt If your local a 100.00 all the way around
and 40.00 for alignment if needed

 

Hell thats what I do them for too...

But ****...350.00 **** I need to raise my prices!

 

Man its so easy, just do it yourself.

 

Yeah, it took me and my bro about 4-5 hours to do. Only hard part was getting that little bearing off the front passenger shock. www.ls1howto.com
has a great write up.

 

I paid a little over $100. Backs are easy to do. Do them yourself.