FS: 25.2 camaro roller
FS: 25.2 camaro roller PICS! MAKE A OFFER
PICS http://s38.photobucket.com/albums/e128/bgspin/
2000 SS red paint in good condition 40k on the OD.
Billingsley fab 9in shortened 3in per side.40 spline strange gun drilled axles,aluim center section,light weight ger set with a wolfe dual anti swaybar welded on.Powder coated gloss black.
Holeshot wholestar rear wheels 15by12in WITH BEADLOCK ring.
there are 29.5 10.5 s MT's on them
aluma star 1 peice front wheels with goodyear tires
Stange dual rear brakes.(A must for a turbo car) 80miles on them
strange front brakes 80miles on them
BMR k-mem and lower control arms
Wolfe t-arm,offset rear control arms,phr.
VFN pin on hatch,and rear clip NIB
LEXAN windows for the front and rear NIB
Joe Vanoverbeek light weight carbonfiber hood NIB
Joe van o prostock wing.clear carbon woven 15in. NIB
here's a description of the chassis.:
It's a stock floor pan 25.2 cage.good to 6.50 in the 1/4.It has been mini tubed as far as it will go keeping stock susp.It has a kirkey mounted as far back as possible and still legal.I also had him put bars thru the firewall and across the shocktower then onto the frame rail.
I need to go get some pics taken..I have a few but nun of the finished product.
With all that being said,I'm not going to sell it less than 27k.
PICS http://s38.photobucket.com/albums/e128/bgspin/
2000 SS red paint in good condition 40k on the OD.
Billingsley fab 9in shortened 3in per side.40 spline strange gun drilled axles,aluim center section,light weight ger set with a wolfe dual anti swaybar welded on.Powder coated gloss black.
Holeshot wholestar rear wheels 15by12in WITH BEADLOCK ring.
there are 29.5 10.5 s MT's on them
aluma star 1 peice front wheels with goodyear tires
Stange dual rear brakes.(A must for a turbo car) 80miles on them
strange front brakes 80miles on them
BMR k-mem and lower control arms
Wolfe t-arm,offset rear control arms,phr.
VFN pin on hatch,and rear clip NIB
LEXAN windows for the front and rear NIB
Joe Vanoverbeek light weight carbonfiber hood NIB
Joe van o prostock wing.clear carbon woven 15in. NIB
here's a description of the chassis.:
It's a stock floor pan 25.2 cage.good to 6.50 in the 1/4.It has been mini tubed as far as it will go keeping stock susp.It has a kirkey mounted as far back as possible and still legal.I also had him put bars thru the firewall and across the shocktower then onto the frame rail.
I need to go get some pics taken..I have a few but nun of the finished product.
With all that being said,I'm not going to sell it less than 27k.
Last edited by sr71bbjr; Sep 13, 2006 at 01:13 AM.
Sounds interesting. Can you post up some pictures or links to them?
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
love to see the pics. can't believe you're selling it, i've heard some of the plans for it and was anticipating seeing it run. you interested in selling the lexan front and rear and the pin on hatch seperate? btw, is that the 9" that came out of Craig's car?
Originally Posted by skipperbisket
love to see the pics. can't believe you're selling it, i've heard some of the plans for it and was anticipating seeing it run. you interested in selling the lexan front and rear and the pin on hatch seperate? btw, is that the 9" that came out of Craig's car?
No I bought the rear new..Mine is powdercoated gloss black,his is painted..Other than that they are one in the same..
I dont want to split anything up at this time.
Trending Topics
Originally Posted by sr71bbjr
With all that being said,I'm not going to sell it less than 27k.
Does it have a chute? Wheelie bars? Fire system?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
get ready for the low-ballers to come out. It was impossible to sell my silver 7.50 ET certified 98 Formula for $20K with 0 miles on it, hopefully someone can appreciate a well-built racecar. Post some pics!
Tony
Tony
http://s38.photobucket.com/albums/e128/bgspin/
I have all the bodyparts in my storage room in boxes still..
I have all the bodyparts in my storage room in boxes still..
Originally Posted by 1 Bad Z
Transmission? Drive shaft/shifter? Fuel system? Shocks? F.A.S.T./BS3?
Does it have a chute? Wheelie bars? Fire system?
Does it have a chute? Wheelie bars? Fire system?
I have bs3 (still NIB) along with a set of allpro heads that I'm selling separate.
The roller comes with all lightweight body parts,and the best wheel/suspension/and rear combo...If the price seems high I incourage you to call around and ask what a 25.2 and mini tub cost alone....
Originally Posted by skipperbisket
trade ya cars heads up for my 01 Z with 10pt etc...
I'm buyin a zo6 with the cash I get for the car...I'm not trying to built another
race car..
Originally Posted by sr71bbjr
wow! so no one likes what they see??I'm truly shocked...
just curious, but it doesnt look like the car would certify to 25.2 because of the floor. There are x's that are required that i dont see in the pictures? overall the cars looks very good though
Originally Posted by Mike@TM
just curious, but it doesnt look like the car would certify to 25.2 because of the floor. There are x's that are required that i dont see in the pictures? overall the cars looks very good though
We bought an 06 25.2 sfi book to build this chassis..there are 4 ways to build it..We kept the stock floor pan so some of the bars aren't needed..