meet in new braunfels...
Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Dec 2005
Posts: 1,588
Likes: 0
From: _Nor caL_ (Bay areA)
Originally Posted by SiL3NtXWS6
there's several f-body owners in san marcos, including me and my roomate
Originally Posted by V6 Bird
It will be a blast man....Plenty of beer to go around. I share. Ill be there all weekend. You should stop by for reals. 
Originally Posted by chriswtx
I go to Biff's almost every Friday night. Stop by and say hi. You can't miss us...
TECH Resident
Joined: Sep 2004
Posts: 797
Likes: 0
From: Clarksville, Tn
Man I cannot wait to get moved to SA!! But my ride wont be there until June or July of next summer.....
I am looking forward to being able to partake in some of these Cruises GTG's.....HOPEFULLY I will have my heads and cam done by then too.....
I am looking forward to being able to partake in some of these Cruises GTG's.....HOPEFULLY I will have my heads and cam done by then too.....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by stangkiller2005
how far is ur car from getting done?
trying to figure out what happened. Ended up spinning 3 rod bearings due to being startved for oil. This is with a brand new ported LS6 oil pump. 
But I get the motor back today I, At least thats what I was told. Wasnt able to get it last week because they needed my ATI balancer due to the new crank needing to be keyed. So I dropped it off Saturday and they are working on it today. Then I still have to finish the 4l80 conversion which I should have all the parts by Friday. Hence why I am torn to go out or hammer on my car to break it in before MM this next month. Putting the motor together is nothing. Will take about 3 to 4 hrs installed in the car. The nick knacks is what kills me. LOL I still havent even included the cage install 
So I will be a busy **** for the next week. Then I just found out I have to work Sat and Sun 16th and the 17th So I am trying to get out of that so I can go to MM @ SAR. Thread Starter
TECH Fanatic
iTrader: (15)
Joined: Dec 2005
Posts: 1,588
Likes: 0
From: _Nor caL_ (Bay areA)
Originally Posted by JMBLOWNWS6
We took it to the track and I had a machining part plug up a oil passage. At least thats what we found. All the parts were clean and we were trying to figure out what happened. Ended up spinning 3 rod bearings due to being startved for oil. This is with a brand new ported LS6 oil pump. But I get the motor back today I, At least thats what I was told. Wasnt able to get it last week because they needed my ATI balancer due to the new crank needing to be keyed. So I dropped it off Saturday and they are working on it today. Then I still have to finish the 4l80 conversion which I should have all the parts by Friday. Hence why I am torn to go out or hammer on my car to break it in before MM this next month. Putting the motor together is nothing. Will take about 3 to 4 hrs installed in the car. The nick knacks is what kills me. LOL I still havent even included the cage install So I will be a busy **** for the next week. Then I just found out I have to work Sat and Sun 16th and the 17th So I am trying to get out of that so I can go to MM @ SAR.
trying to figure out what happened. Ended up spinning 3 rod bearings due to being startved for oil. This is with a brand new ported LS6 oil pump. But I get the motor back today I, At least thats what I was told. Wasnt able to get it last week because they needed my ATI balancer due to the new crank needing to be keyed. So I dropped it off Saturday and they are working on it today. Then I still have to finish the 4l80 conversion which I should have all the parts by Friday. Hence why I am torn to go out or hammer on my car to break it in before MM this next month. Putting the motor together is nothing. Will take about 3 to 4 hrs installed in the car. The nick knacks is what kills me. LOL I still havent even included the cage install So I will be a busy **** for the next week. Then I just found out I have to work Sat and Sun 16th and the 17th So I am trying to get out of that so I can go to MM @ SAR. 
Originally Posted by Donohue96M6Z28
what up mike. anyone else from LS2 coming down w you? I live about 10 min from there now. Which river are y'all floating?
Call my cell Friday night after 9pm..>We should be all setup by then...floating Saturday around 11 or so..
214-288-0969
Originally Posted by JMBLOWNWS6
I sure they are floating the Comal(****)RIVER 
Originally Posted by V6 Bird
As long as the waters flowing its all good...We will be drinking our own **** on the water (corona)
The guadalupe on my boat Saturday 
Originally Posted by JMBLOWNWS6
Looks like Im going fishing bro. Ill be on the other side of the river The guadalupe on my boat Saturday
The guadalupe on my boat Saturday Or north the lake? Whatcha fishing for anyway? Catfish, channel cat? Poon? jk
Originally Posted by V6 Bird
Where the hell can you put a boat on that river? Further south??
Or north the lake? Whatcha fishing for anyway? Catfish, channel cat? Poon? jk
Or north the lake? Whatcha fishing for anyway? Catfish, channel cat? Poon? jk
But I mostly drink beer and cruise around.
Originally Posted by JMBLOWNWS6
Guadalupe Bass bro! And If you know where burger king is on IH 35 the river is right beside it. But I mostly drink beer and cruise around.
But I mostly drink beer and cruise around. As long as the female view is nice this weekend (im sure it will) ill be fine
Thats all the fishing i plan on doing
Originally Posted by V6 Bird
Most likely the Comal....
Call my cell Friday night after 9pm..>We should be all setup by then...floating Saturday around 11 or so..
214-288-0969
Call my cell Friday night after 9pm..>We should be all setup by then...floating Saturday around 11 or so..
214-288-0969
