Kennedale THURSDAY???
Originally Posted by dan03mach
Jeremy's car got drug by MellowYellows car bad.. Jeremy better do something do that damn thing.. Everyone is going to start dragging it...
Originally Posted by NickcZ28
I cant wait to drag you! AHHAHAHHAHAHA
AGAIN
JUST LIKE THE OLD DAYS!!!
AGAIN
JUST LIKE THE OLD DAYS!!!
Originally Posted by dan03mach
He needs the right Heads/Cam combo first.. The **** he has now isn't working..
Originally Posted by V6 Bird
Had he only went with a set of heads done by my guy and a real cam, his power and curve would be healthy...Oh well. He learns the hard way!
Originally Posted by V6 Bird
Something he say at my house for an hour or so talking about...Before he went with whats on there now...Only thing I can say now...i told you so.
Thread Starter
11 Second Club
iTrader: (9)
Joined: Dec 2004
Posts: 1,982
Likes: 0
From: Euless-Grapevine TX
Originally Posted by Vcious04
Thats was some fun **** when I would make it out... More to come..
Ahh jeremy will get his setup corrected im sure.....
Originally Posted by NickcZ28
Its cool man mine is slow too! basically stock!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
11 Second Club
iTrader: (9)
Joined: Dec 2004
Posts: 1,982
Likes: 0
From: Euless-Grapevine TX
Originally Posted by brady346
Maybe we can meet up out there for a run or something. I wont stand a chance in hell since I dont have a lug wrench or jack in my car to put on my ET Streets with but ill play.
Ive just got bald street tires to...even though I dont make enough power to even spin the tire.....
Originally Posted by NickcZ28
What do you have done so far??
Ive just got bald street tires to...even though I dont make enough power to even spin the tire.....
Ive just got bald street tires to...even though I dont make enough power to even spin the tire.....
but on bald tires you will prolly kill me. 
I am sure that Notch with a heart will be able to beat what I have planned.
I am not willing to strip the car apart...... only plan to make around 500 horses give or take....... and the bottle wont go on until late next summer.
Hutto.... I spoke to Chris last night... his price is comparable to TSP.... so i would rather go with him then TSP.... the only one that will compete with Chris in my book is Erik....... either of the two of them for the cam/heads. I am waiting on some numbers from Erik on a set of cnc heads that he has in the shop...... Chris is pretty knowledgeable. The only concern between picking between the two is that Erik might be able to setup the cam on an engine dyno... but I think Chris has one.... i would have to get the mottor to him.
I am not willing to strip the car apart...... only plan to make around 500 horses give or take....... and the bottle wont go on until late next summer.
Hutto.... I spoke to Chris last night... his price is comparable to TSP.... so i would rather go with him then TSP.... the only one that will compete with Chris in my book is Erik....... either of the two of them for the cam/heads. I am waiting on some numbers from Erik on a set of cnc heads that he has in the shop...... Chris is pretty knowledgeable. The only concern between picking between the two is that Erik might be able to setup the cam on an engine dyno... but I think Chris has one.... i would have to get the mottor to him.
Originally Posted by NickcZ28
Ya Ive seen them too, i asked them what they had done and they told me all the **** I left on there and said they put it on...The hood and wheels too, Dumb asses...Anyways I got an 01 SS, its pretty stock just has lid and catback and an A4 ive never owened a 4l60e car yet this should be fun...Adding some parts first of JAN...
Originally Posted by dan03mach
Jeremy's car got drug by MellowYellows car bad.. Jeremy better do something do that damn thing.. Everyone is going to start dragging it...
Originally Posted by Forteen3GT
I am sure that Notch with a heart will be able to beat what I have planned.
I am not willing to strip the car apart...... only plan to make around 500 horses give or take....... and the bottle wont go on until late next summer.
Hutto.... I spoke to Chris last night... his price is comparable to TSP.... so i would rather go with him then TSP.... the only one that will compete with Chris in my book is Erik....... either of the two of them for the cam/heads. I am waiting on some numbers from Erik on a set of cnc heads that he has in the shop...... Chris is pretty knowledgeable. The only concern between picking between the two is that Erik might be able to setup the cam on an engine dyno... but I think Chris has one.... i would have to get the mottor to him.
I am not willing to strip the car apart...... only plan to make around 500 horses give or take....... and the bottle wont go on until late next summer.
Hutto.... I spoke to Chris last night... his price is comparable to TSP.... so i would rather go with him then TSP.... the only one that will compete with Chris in my book is Erik....... either of the two of them for the cam/heads. I am waiting on some numbers from Erik on a set of cnc heads that he has in the shop...... Chris is pretty knowledgeable. The only concern between picking between the two is that Erik might be able to setup the cam on an engine dyno... but I think Chris has one.... i would have to get the mottor to him.
Originally Posted by Forteen3GT
I am sure that Notch with a heart will be able to beat what I have planned.
I am not willing to strip the car apart...... only plan to make around 500 horses give or take....... and the bottle wont go on until late next summer.
Hutto.... I spoke to Chris last night... his price is comparable to TSP.... so i would rather go with him then TSP.... the only one that will compete with Chris in my book is Erik....... either of the two of them for the cam/heads. I am waiting on some numbers from Erik on a set of cnc heads that he has in the shop...... Chris is pretty knowledgeable. The only concern between picking between the two is that Erik might be able to setup the cam on an engine dyno... but I think Chris has one.... i would have to get the mottor to him.
I am not willing to strip the car apart...... only plan to make around 500 horses give or take....... and the bottle wont go on until late next summer.
Hutto.... I spoke to Chris last night... his price is comparable to TSP.... so i would rather go with him then TSP.... the only one that will compete with Chris in my book is Erik....... either of the two of them for the cam/heads. I am waiting on some numbers from Erik on a set of cnc heads that he has in the shop...... Chris is pretty knowledgeable. The only concern between picking between the two is that Erik might be able to setup the cam on an engine dyno... but I think Chris has one.... i would have to get the mottor to him.
