Lot of stuff that MUST go.
Thread Starter
TECH Senior Member
iTrader: (18)
Joined: Jun 2002
Posts: 10,036
Likes: 0
From: NW Houston, TX
Performance parts
(1)Spec stageIII w/aluminum pressure plate-250
-Bought from forum member. Used for 500 miles then I bought it. Been under my bed every since.
(16)Manley single valve springs-125
-New in box, bought from MTI, same springs they use in their cam packages.
Stock Parts
(8)Stock 99 injectors-40
-Around 40k miles
(2)Stock cams-25
-unknown milage
(1)Stock timing chain-5
-One unknown milage
(16)Stock Lifters-50
-Around 40k miles
(16)Stock springs and retainers-25
-around 30k miles
(2)LS1 coolant crossover lines-10
-Road racers use these and modify the bottom of LS6 intake to help elimination of hot spots in cooling passages.
(1)Stock Thermostat-15
-Around 5k miles
(1)Stock steel driveshaft-65
-If your worried about breaking the stock aluminum
(1)Stock TQ arm-15
-Little dirty, but in good shape
(2)Stock rear lower control arms-25
-Around 60k miles. Bushings are in excelent condition
(16)Stock pistons and rods-50
-One set I would recomend checking the big end bore(unknown milage). The other should be fine (around 35k miles. Will need new rings.
(1)Stock Crank-50
-Has a spun rod, needs to be repaired
(1)98 oil pressure sending unit-30
-New in box, bought the wrong one.
All prices are OBO. Buyer will pay shipping. Will, accept paypal w/ added 3% fee. Will accept personal checks and ship items once check clears.
(1)Spec stageIII w/aluminum pressure plate-250
-Bought from forum member. Used for 500 miles then I bought it. Been under my bed every since.
(16)Manley single valve springs-125
-New in box, bought from MTI, same springs they use in their cam packages.
Stock Parts
(8)Stock 99 injectors-40
-Around 40k miles
(2)Stock cams-25
-unknown milage
(1)Stock timing chain-5
-One unknown milage
(16)Stock Lifters-50
-Around 40k miles
(16)Stock springs and retainers-25
-around 30k miles
(2)LS1 coolant crossover lines-10
-Road racers use these and modify the bottom of LS6 intake to help elimination of hot spots in cooling passages.
(1)Stock Thermostat-15
-Around 5k miles
(1)Stock steel driveshaft-65
-If your worried about breaking the stock aluminum
(1)Stock TQ arm-15
-Little dirty, but in good shape
(2)Stock rear lower control arms-25
-Around 60k miles. Bushings are in excelent condition
(16)Stock pistons and rods-50
-One set I would recomend checking the big end bore(unknown milage). The other should be fine (around 35k miles. Will need new rings.
(1)Stock Crank-50
-Has a spun rod, needs to be repaired
(1)98 oil pressure sending unit-30
-New in box, bought the wrong one.
All prices are OBO. Buyer will pay shipping. Will, accept paypal w/ added 3% fee. Will accept personal checks and ship items once check clears.


