. 
Proven setup FOR SALE
Proven setup FOR SALE This combo in my car ran 6.20's every time i took it out. Whoever gets this will get a great setup that everybody knows works...
Nitrous setup - TNT F2 power ring kit, Nitro Daves Stand Alone Fuel System, MSD window switch, purge, bottle heater, 15lb TNT Nitrous Bottle, 2 sets of bottle brackets, all wiring, switches, and relays
Heads - 64cc CNC ported Cylinder heads. Not sure who did the port work on them. i was told Trevor Johnson but they are CNC'd so it wasnt him. All of the #'s are ground off of the head also??? PRC dual Springs with about 2,000 miles on heads and springs. Hardened pushrods also...
Cam - Custom grind Cam Motion Cam. Specs can be given upon purchase or to a SERIOUS buyer. The car made great power. The cam was designed by Scott and Daniel at SQR and Sam.
Shortblock - 347ci built by Hans Fuestal. Forged JE Pistons, ARP rod bolts, ARP main studs, LS6 oil pump, Comp R Lifters. A piston or 2 may have a broke ringland (not really sure). The #5 and #6 plugs always had a lot of oil on them but the car still ran consistent 6.20's like that so i dont know. I would personally have it taken apart and checked before putting it back in a car just to be safe. Ran perfect when pulled out. WILL NOT include pan, front or rear covers, or valley cover....
Converter - Neal Chance custom 4000 nitrous stall for Turbo 350/400. Everybody knows these converters are the best of the best. The car 60 footed mid 1.30's on the foot brake. So needless to say it works.
Pulley - ASP underdrive pulley. Around 2000 miles on it I would guess.
$4800
Do the math on this stuff and it is a great deal and IT WORKS... Here are a couple of pics and a video...
Nitrous setup - TNT F2 power ring kit, Nitro Daves Stand Alone Fuel System, MSD window switch, purge, bottle heater, 15lb TNT Nitrous Bottle, 2 sets of bottle brackets, all wiring, switches, and relays
Heads - 64cc CNC ported Cylinder heads. Not sure who did the port work on them. i was told Trevor Johnson but they are CNC'd so it wasnt him. All of the #'s are ground off of the head also??? PRC dual Springs with about 2,000 miles on heads and springs. Hardened pushrods also...
Cam - Custom grind Cam Motion Cam. Specs can be given upon purchase or to a SERIOUS buyer. The car made great power. The cam was designed by Scott and Daniel at SQR and Sam.
Shortblock - 347ci built by Hans Fuestal. Forged JE Pistons, ARP rod bolts, ARP main studs, LS6 oil pump, Comp R Lifters. A piston or 2 may have a broke ringland (not really sure). The #5 and #6 plugs always had a lot of oil on them but the car still ran consistent 6.20's like that so i dont know. I would personally have it taken apart and checked before putting it back in a car just to be safe. Ran perfect when pulled out. WILL NOT include pan, front or rear covers, or valley cover....
Converter - Neal Chance custom 4000 nitrous stall for Turbo 350/400. Everybody knows these converters are the best of the best. The car 60 footed mid 1.30's on the foot brake. So needless to say it works.
Pulley - ASP underdrive pulley. Around 2000 miles on it I would guess.
$4800
Do the math on this stuff and it is a great deal and IT WORKS... Here are a couple of pics and a video...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Addict
Joined: Feb 2002
Posts: 2,319
Likes: 0
From: Lewisville, Texas
Originally Posted by SuperGook
Why are you selling your set-up Josh?
Originally Posted by Elite_Hot_Rod
"A piston or 2 may have a broke ringland (not really sure). The #5 and #6 plugs always had a lot of oil on them but the car still ran consistent 6.20's like that so i dont know. I would personally have it taken apart and checked before putting it back in a car just to be safe. Ran perfect when pulled out."
Originally Posted by Forteen3GT
interested in the convertor and pulley.... what would you sell it for?
Originally Posted by slowredz
You are about the 10th person that has asked for the converter and I will sell the pulley for $170 if this stuff doesnt sell in the next few days...
Originally Posted by dan03mach
How much do you want for that stand alone set up?
Originally Posted by slowredz
Dan I would really rather sell the whole nitrous kit together since it is EVERYTHING needed. Just the stand alone by itself was like $740, I would take $1100 for everything...
