C6 Z06 - new setup
Thread Starter
11 Second Club
Joined: Apr 2007
Posts: 130
Likes: 0
From: Baton Rouge
C6 Z06 - new setup getting alot of questions/pms about new setup, i guess texas guys don't check other sections too much 
here's the progression:
stock : 443/x?
cai,tune: 475/441
LG headers/catback, retune: 490/471
LG heads/cam G7x4 pkg (fairly mild street cam, they have 2 bigger, 3 smaller cams), retune : dyno here
sound clip here
here's the progression:
stock : 443/x?
cai,tune: 475/441
LG headers/catback, retune: 490/471
LG heads/cam G7x4 pkg (fairly mild street cam, they have 2 bigger, 3 smaller cams), retune : dyno here
sound clip here
Teching In
Joined: Nov 2006
Posts: 4
Likes: 0
I would like to run that vette, cept it seems it's gonna be a wet night.
I pull a couple cars on my neighbors 01 gsxr - 600 with all the mods. Even from 50-135ish then I pull a bit.
Car trapped a best of 122mph at ennis, but that was on street tires and a few hp ago. Yours should trap around 135 or so I guess? Might be good, but I'll probably get my *** whopped. I really want to run a stock c6 z06 but hey. I got a couple hundred more horses coming soon so maybe we can do a before and after.
Maybe wednesday night?
I pull a couple cars on my neighbors 01 gsxr - 600 with all the mods. Even from 50-135ish then I pull a bit.
Car trapped a best of 122mph at ennis, but that was on street tires and a few hp ago. Yours should trap around 135 or so I guess? Might be good, but I'll probably get my *** whopped. I really want to run a stock c6 z06 but hey. I got a couple hundred more horses coming soon so maybe we can do a before and after.
Maybe wednesday night?
Originally Posted by _Zac
Pretty impressive, just don't spray her till you get some better than stock internals. 
What cam did you go with?
What cam did you go with?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by GoldRust
Why would you not spay it. I have done SEVERAL with spray. You are just limited to around a 150 shot or 700 or so rear wheel. Hell the one that I flew to Qatar in the middle east to build made around 735 rwhp but they have 98 octane at the pump, lucky Ba***rds. That on the stock fuel system too.
Originally Posted by GoldRust
Oh i forgot to tell you nice #'s by the way now get her to the track because dyno numbers dont mean squat without good track times 
Thread Starter
11 Second Club
Joined: Apr 2007
Posts: 130
Likes: 0
From: Baton Rouge
Originally Posted by _Zac
What cam did you go with?
as far as spraying, i don't wanna get addicted to the bottle. i'm gonna build the motor and do a cam swap first (prolly in a month or so). going to ennis..i got booted last time at 11.2, i'm pretty sure gonna hit 10s now, so i gotta wait and get a roll cage (the lady handing out the time slips said "we were gonna go 'round if she saw me there again without a cage")
Originally Posted by Jeenis
its a G7x4 cam, don't know the specs, over 610 lift? i'm gonna TRY to make it wednesday, i got a sandy vagina when it's after 11pm on weekdays
as far as spraying, i don't wanna get addicted to the bottle. i'm gonna build the motor and do a cam swap first (prolly in a month or so). going to ennis..i got booted last time at 11.2, i'm pretty sure gonna hit 10s now, so i gotta wait and get a roll cage (the lady handing out the time slips said "we were gonna go 'round if she saw me there again without a cage")
as far as spraying, i don't wanna get addicted to the bottle. i'm gonna build the motor and do a cam swap first (prolly in a month or so). going to ennis..i got booted last time at 11.2, i'm pretty sure gonna hit 10s now, so i gotta wait and get a roll cage (the lady handing out the time slips said "we were gonna go 'round if she saw me there again without a cage")
but one time out there there was this girl that was about 18 (my age) that was hot as **** she was all flirting with me callin me a naughty boy for not wearing my helment and throwing her ******* nearly in my face.
Originally Posted by LightEmUpLs1
that lady is a bitch that hands out the time slips. old HAG!
but one time out there there was this girl that was about 18 (my age) that was hot as **** she was all flirting with me callin me a naughty boy for not wearing my helment and throwing her ******* nearly in my face.
but one time out there there was this girl that was about 18 (my age) that was hot as **** she was all flirting with me callin me a naughty boy for not wearing my helment and throwing her ******* nearly in my face.
Launching!
Joined: Jul 2004
Posts: 1,293
Likes: 0
From: H-Town
Originally Posted by GoldRust
Why would you not spay it. I have done SEVERAL with spray. You are just limited to around a 150 shot or 700 or so rear wheel. Hell the one that I flew to Qatar in the middle east to build made around 735 rwhp but they have 98 octane at the pump, lucky Ba***rds. That on the stock fuel system too.
Nice numbers!! Be safe in that beast
Originally Posted by beardWS6
That an`t no lie! Hows the shop going Josh?
You should stop by and check us out. It has been a long time since the good ol MTI days