My completed nitrous system *56K warning*
Thread Starter
TECH Resident
iTrader: (9)
Joined: Oct 2005
Posts: 958
Likes: 0
From: Clear Lake, Texas
My completed nitrous system *56K warning* finally finished my dynotune wet kit. it has been working for a few months but i just got the time to make everything nice and pretty today.
i realize its not professional quality by any means but i think its pretty dam good considering my age/experience with nitrous.
please point out any mistakes or things that could be made better, or any comments in general.
i realize its not professional quality by any means but i think its pretty dam good considering my age/experience with nitrous.
please point out any mistakes or things that could be made better, or any comments in general.
That's the feedline, filter, and solenoid if you look closer (correct me if I'm wrong too!)
Left feedback in your post in the nitrous forum. Congrats on your install! Looks is just that, cosmetic...how it works is far more important IMO!
Left feedback in your post in the nitrous forum. Congrats on your install! Looks is just that, cosmetic...how it works is far more important IMO!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
Thread Starter
TECH Resident
iTrader: (9)
Joined: Oct 2005
Posts: 958
Likes: 0
From: Clear Lake, Texas
the purge comes out at the windshield on the driver's side, that is the nitrous coming in and the filter.
i had the same amount of line either way and that seemed like a good mounting spot so i went with it.
i had the same amount of line either way and that seemed like a good mounting spot so i went with it.
