How To Remove????
Thread Starter
Teching In
Joined: Jul 2007
Posts: 0
Likes: 0
From: Clear Lake, Tx
How To Remove???? Ok guys My father just bought a 55 Chevy truck that is pumpkin orange and black.. The problem is the black is a line x material
and he wants to remove it. Anybody have any ideas on how to remove without damaging the body under it??? Help
and he wants to remove it. Anybody have any ideas on how to remove without damaging the body under it??? Help Thread Starter
Teching In
Joined: Jul 2007
Posts: 0
Likes: 0
From: Clear Lake, Tx
Ya it would not be so bad along the bottom of the truck but it wraps around and up over the nose of the truck..?? I will get pic as soon as I can
Its not gonna come off unless your ready to repaint the ENTIRE truck. You will probably have the take the body panels off and put some heat to the backside of them and peel it off. However doing this will damage the orange paint as well
Thread Starter
Teching In
Joined: Jul 2007
Posts: 0
Likes: 0
From: Clear Lake, Tx
I was thinking plastic bead blast?? instead of sand?? I may have to try on a small spot or get a practice pice to mess with to find the best way to remove it.
I have a chisel and a hammer! I would love to help get it off but only after your dad is drunk and passed out so he won't beat my ***!
Just sand the whole truck down and repaint the thing! It looks cool but your right, like we discussed the day he got it, the liner has to go on the front end!
Just sand the whole truck down and repaint the thing! It looks cool but your right, like we discussed the day he got it, the liner has to go on the front end!
Thread Starter
Teching In
Joined: Jul 2007
Posts: 0
Likes: 0
From: Clear Lake, Tx
I have a chisel and a hammer! I would love to help get it off but only after your dad is drunk and passed out so he won't beat my ***!
Just sand the whole truck down and repaint the thing! It looks cool but your right, like we discussed the day he got it, the liner has to go on the front end!
Just sand the whole truck down and repaint the thing! It looks cool but your right, like we discussed the day he got it, the liner has to go on the front end!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Nah, I have an air sander, more of lots of dust. We could pull it outside and sand it off and turn his grass orange. That would be wonderful for the environment.
Thread Starter
Teching In
Joined: Jul 2007
Posts: 0
Likes: 0
From: Clear Lake, Tx
I dont worry as much about the enviroment as I would Orange buggers..lol and I am sure we could devote alot of beer drinking to that.. Hey maybe we could have a sanding party??
HAHA I have a bad A air sander too but would still be alot of sanding..did you see how thick that stuff was??
I dont worry as much about the enviroment as I would Orange buggers..lol and I am sure we could devote alot of beer drinking to that.. Hey maybe we could have a sanding party??
I dont worry as much about the enviroment as I would Orange buggers..lol and I am sure we could devote alot of beer drinking to that.. Hey maybe we could have a sanding party??
Try posting this question in the paint section. You might get more useful help from there.
Last edited by Randy_S; Oct 19, 2007 at 03:33 PM.
Thread Starter
Teching In
Joined: Jul 2007
Posts: 0
Likes: 0
From: Clear Lake, Tx
and work wile we drink